[PATCH v2] phy: qcom: qmp: Add debug prints for register writes
Bjorn Andersson
andersson at kernel.org
Wed Jul 31 19:26:27 PDT 2024
On Wed, Jul 31, 2024 at 05:26:37PM GMT, Manivannan Sadhasivam wrote:
> These register prints are useful to validate the init sequence against the
> Qcom internal documentation and also to share with the Qcom hw engineers to
> debug issues related to PHY.
>
I've written this patch every time I've touched one of these PHYs, so I
certainly like this.
> Sample debug prints:
>
> QMP PHY: Writing Reg: QSERDES_V5_COM_SYSCLK_EN_SEL Offset: 0x0094 Val: 0xd9
> QMP PHY: Writing Reg: QSERDES_V5_COM_HSCLK_SEL Offset: 0x0158 Val: 0x11
That said, with multiple instances of PHYs being configured at about the
same time it seems this would benefit greatly from something identifying
which PHY instance the write relates to?
dev_dbg() would certainly be nice...
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
> ---
>
> Changes in v2:
>
> * Modifed the debug print to include reg offset
>
> drivers/phy/qualcomm/phy-qcom-qmp-common.h | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-common.h b/drivers/phy/qualcomm/phy-qcom-qmp-common.h
> index 799384210509..40beb413328f 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-common.h
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-common.h
> @@ -9,6 +9,7 @@
> struct qmp_phy_init_tbl {
> unsigned int offset;
> unsigned int val;
> + char *name;
const?
Regards,
Bjorn
> /*
> * mask of lanes for which this register is written
> * for cases when second lane needs different values
> @@ -20,6 +21,7 @@ struct qmp_phy_init_tbl {
> { \
> .offset = o, \
> .val = v, \
> + .name = #o, \
> .lane_mask = 0xff, \
> }
>
> @@ -27,6 +29,7 @@ struct qmp_phy_init_tbl {
> { \
> .offset = o, \
> .val = v, \
> + .name = #o, \
> .lane_mask = l, \
> }
>
> @@ -45,6 +48,8 @@ static inline void qmp_configure_lane(void __iomem *base,
> if (!(t->lane_mask & lane_mask))
> continue;
>
> + pr_debug("QMP PHY: Writing Reg: %s Offset: 0x%04x Val: 0x%02x\n",
> + t->name, t->offset, t->val);
> writel(t->val, base + t->offset);
> }
> }
> --
> 2.25.1
>
>
More information about the linux-phy
mailing list