[PATCH] phy: qcom: qmp: Add debug prints for register writes

[Vinod Koul]

On 30-07-24, 15:33, Manivannan Sadhasivam wrote:
> These register prints are useful to validate the init sequence against the
> Qcom internal documentation and also to share with the Qcom hw engineers to
> debug issues related to PHY.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-common.h | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-common.h b/drivers/phy/qualcomm/phy-qcom-qmp-common.h
> index 799384210509..e6a6bcfcac28 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-common.h
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-common.h
> @@ -9,6 +9,7 @@
>  struct qmp_phy_init_tbl {
>  	unsigned int offset;
>  	unsigned int val;
> +	char *name;
>  	/*
>  	 * mask of lanes for which this register is written
>  	 * for cases when second lane needs different values
> @@ -20,6 +21,7 @@ struct qmp_phy_init_tbl {
>  	{				\
>  		.offset = o,		\
>  		.val = v,		\
> +		.name = #o,		\
>  		.lane_mask = 0xff,	\
>  	}
>  
> @@ -27,6 +29,7 @@ struct qmp_phy_init_tbl {
>  	{				\
>  		.offset = o,		\
>  		.val = v,		\
> +		.name = #o,		\
>  		.lane_mask = l,		\
>  	}
>  
> @@ -45,6 +48,7 @@ static inline void qmp_configure_lane(void __iomem *base,
>  		if (!(t->lane_mask & lane_mask))
>  			continue;
>  
> +		pr_debug("QMP PHY: Writing: %s --> 0x%02x\n", t->name, t->val);

This lgtm, but fails to help when offset _might_ be incorrect, including
the offset value as well (not just the name) would be better imo... 

>  		writel(t->val, base + t->offset);
>  	}
>  }
> -- 
> 2.25.1

-- 
~Vinod