[PATCH v7 5/6] arm64: dts: qcom: msm8998: add HDMI GPIOs

[Marc Gonzalez]

MSM8998 GPIO pin controller reference design defines:

- CEC: pin 31
- DDC: pin 32,33
- HPD: pin 34

Downstream vendor code for reference:

https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/blob/caf_migration/kernel.lnx.4.4.r38-rel/arch/arm/boot/dts/qcom/msm8998-pinctrl.dtsi#L2324-2400

mdss_hdmi_{cec,ddc,hpd}_{active,suspend}

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Signed-off-by: Marc Gonzalez <mgonzalez at freebox.fr>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index e5f051f5a92de..ba5e873f0f35f 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1434,6 +1434,34 @@ blsp2_spi6_default: blsp2-spi6-default-state {
 				drive-strength = <6>;
 				bias-disable;
 			};
+
+			hdmi_cec_default: hdmi-cec-default-state {
+				pins = "gpio31";
+				function = "hdmi_cec";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hdmi_ddc_default: hdmi-ddc-default-state {
+				pins = "gpio32", "gpio33";
+				function = "hdmi_ddc";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hdmi_hpd_default: hdmi-hpd-default-state {
+				pins = "gpio34";
+				function = "hdmi_hot";
+				drive-strength = <16>;
+				bias-pull-down;
+			};
+
+			hdmi_hpd_sleep: hdmi-hpd-sleep-state {
+				pins = "gpio34";
+				function = "hdmi_hot";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
 		};
 
 		remoteproc_mss: remoteproc at 4080000 {

-- 
2.34.1