[PATCH v7 0/6] HDMI TX support in msm8998

[Marc Gonzalez]

DT bits required for HDMI TX support in qcom APQ8098 (MSM8998 cousin)

---
Changes in v7:
- prefix the labels hdmi: and hdmi_phy: with mdss_ (Konrad)
- DID NOT MODIFY patch 3, based on conversation between Conor & Dmitry
- tested 40+40 boots with/without maxcpus=1 => no iommu panic witnessed
- Collect tags from Konrad & Dmitry (hopefully b4 did the right thing)
- Link to v6: https://lore.kernel.org/r/20240715-hdmi-tx-v6-0-d27f029627ad@freebox.fr

Changes in v6:
- Fold HDMI PHY driver submission into this series
  => [PATCH v2] drm/msm: add msm8998 hdmi phy/pll support
  => Link to v2: https://lore.kernel.org/all/20240704-hdmi-phy-v2-1-a7f5af202cb5@freebox.fr/
     - Rebase onto v6.10
     - Move drivers/gpu/drm/msm/hdmi/hdmi.xml.h to drivers/gpu/drm/msm/registers/display/hdmi.xml
     - Add copyright attribution
     - Remove all dead/debug/temporary code
  => Link to v1: https://lore.kernel.org/all/63337d63-67ef-4499-8a24-5f6e9285c36b@freebox.fr/
- split HDMI PHY driver patch in 2 parts (PHY & TX)
- Use same regulator names as msm8996 (Dmitry)
- Remove printk statements
- Add Vinod's Ack on patch 1
- Expand commit message on patch 4 = HDMI PHY driver
- Link to v5: https://lore.kernel.org/r/20240627-hdmi-tx-v5-0-355d5c1fbc3c@freebox.fr

Changes in v5:
- Fix property & property-names for TX pinctrl in DTSI (Konrad)
- NOT CHANGED: clock trees for TX & PHY based on Dmitry & Jeffrey's remarks
- Link to v4: https://lore.kernel.org/r/20240613-hdmi-tx-v4-0-4af17e468699@freebox.fr

Changes in v4:
- Collect tags since v3
- Reword patch 1 subject (Vinod)
- Link to v3: https://lore.kernel.org/r/20240606-hdmi-tx-v3-0-9d7feb6d3647@freebox.fr

Changes in v3
- Address Rob's comments on patch 2:
  - 'maxItems: 5' for clocks in the 8996 if/then schema
  - match the order of 8996 for the clock-names in common

---
Arnaud Vrac (2):
      drm/msm: add msm8998 hdmi phy/pll support
      arm64: dts: qcom: add HDMI nodes for msm8998

Marc Gonzalez (4):
      dt-bindings: phy: add qcom,hdmi-phy-8998
      dt-bindings: display/msm: hdmi: add qcom,hdmi-tx-8998
      drm/msm/hdmi: add "qcom,hdmi-tx-8998" compatible
      arm64: dts: qcom: msm8998: add HDMI GPIOs

 .../devicetree/bindings/display/msm/hdmi.yaml      |  28 +-
 .../devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml |   1 +
 arch/arm64/boot/dts/qcom/msm8998.dtsi              | 128 +++-
 drivers/gpu/drm/msm/Makefile                       |   1 +
 drivers/gpu/drm/msm/hdmi/hdmi.c                    |   1 +
 drivers/gpu/drm/msm/hdmi/hdmi.h                    |   8 +
 drivers/gpu/drm/msm/hdmi/hdmi_phy.c                |   5 +
 drivers/gpu/drm/msm/hdmi/hdmi_phy_8998.c           | 779 +++++++++++++++++++++
 drivers/gpu/drm/msm/registers/display/hdmi.xml     |  89 +++
 9 files changed, 1037 insertions(+), 3 deletions(-)
---
base-commit: 003a26f5074bfe024603cf76f8fd486a5344f307
change-id: 20240606-hdmi-tx-00ee8e7ddbac

Best regards,
-- 
Marc Gonzalez <mgonzalez at freebox.fr>