[PATCH 3/6] dt-bindings: phy: mxs-usb-phy: add nxp,sim property

[Xu Yang]

On Mon, Jul 22, 2024 at 08:51:10PM -0600, Rob Herring wrote:
> On Thu, Jul 18, 2024 at 06:26:34PM +0800, Xu Yang wrote:
> > i.MX7ULP need properly set System Integration Module(SIM) module to make
> > usb wakeup work well. This will add a "nxp,sim" property.
> > 
> > Signed-off-by: Xu Yang <xu.yang_2 at nxp.com>
> > ---
> >  .../devicetree/bindings/phy/fsl,mxs-usbphy.yaml    | 14 ++++++++++++++
> >  1 file changed, 14 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> > index f4b1ca2fb562..2141f271f8f1 100644
> > --- a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> > @@ -87,6 +87,12 @@ properties:
> >      maximum: 119
> >      default: 100
> >  
> > +  nxp,sim:
> > +    description:
> > +      The system integration module (SIM) provides system control and chip
> > +      configuration registers.
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +
> >  required:
> >    - compatible
> >    - reg
> > @@ -110,6 +116,14 @@ allOf:
> >        required:
> >          - fsl,anatop
> >  
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          const: fsl,imx7ulp-usbphy
> > +    then:
> > +      required:
> > +        - nxp,sim
> 
>        else:
>          properties:
>            nxp,sim: false

Okay, I will add it.

Thanks,
Xu Yang

> 
> 
> > +
> >  additionalProperties: false
> >  
> >  examples:
> > -- 
> > 2.34.1
> >