[PATCH v5 4/4] arm64: dts: qcom: add HDMI nodes for msm8998

[Konrad Dybcio]

On 27.06.2024 5:54 PM, Marc Gonzalez wrote:
> From: Arnaud Vrac <avrac at freebox.fr>
> 
> Port device nodes from vendor code.
> 
> Signed-off-by: Arnaud Vrac <avrac at freebox.fr>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> Signed-off-by: Marc Gonzalez <mgonzalez at freebox.fr>
> ---
>  arch/arm64/boot/dts/qcom/msm8998.dtsi | 100 +++++++++++++++++++++++++++++++++-
>  1 file changed, 99 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> index ba5e873f0f35f..417c12534823f 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> @@ -2785,7 +2785,7 @@ mmcc: clock-controller at c8c0000 {
>  				 <&mdss_dsi0_phy 0>,
>  				 <&mdss_dsi1_phy 1>,
>  				 <&mdss_dsi1_phy 0>,
> -				 <0>,
> +				 <&hdmi_phy 0>,
>  				 <0>,
>  				 <0>,
>  				 <&gcc GCC_MMSS_GPLL0_DIV_CLK>;
> @@ -2890,6 +2890,14 @@ dpu_intf2_out: endpoint {
>  							remote-endpoint = <&mdss_dsi1_in>;
>  						};
>  					};
> +
> +					port at 2 {
> +						reg = <2>;
> +
> +						dpu_intf3_out: endpoint {
> +							remote-endpoint = <&hdmi_in>;
> +						};
> +					};
>  				};
>  			};
>  
> @@ -3045,6 +3053,96 @@ mdss_dsi1_phy: phy at c996400 {
>  
>  				status = "disabled";
>  			};
> +
> +			hdmi: hdmi-tx at c9a0000 {

Please prefix the labels (hdmi: and hdmi_phy:) with mdss_

Otherwise, this looks good

Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>


One thing I noticed (testing on the 8998 MTP), enabling MDSS (not necessarily
HDMI, mdss and mdp is enough) results in SMMU lockups about 30% of the time..

[    4.911422] arm-smmu cd00000.iommu: FSR    = 00000402 [Format=2 TF], SID=0x0
[    4.913412] platform c901000.display-controller: Fixed dependency cycle(s) with /soc at 0/display-subsystem at c900000/hdmi-tx at c9a0000
[    4.923353] arm-smmu cd00000.iommu: FSYNR0 = 00000021 [S1CBNDX=0 PNU PLVL=1]
[    4.927893] arm-smmu cd00000.iommu: FSR    = 00000402 [Format=2 TF], SID=0x0
[    4.930647] platform c9a0000.hdmi-tx: Fixed dependency cycle(s) with /soc at 0/display-subsystem at c900000/display-controller at c901000
[    4.941928] arm-smmu cd00000.iommu: FSYNR0 = 00000021 [S1CBNDX=0 PNU PLVL=1]
[    4.944438] arm-smmu cd00000.iommu: FSR    = 00000402 [Format=2 TF], SID=0x0
[    4.952338] msm_hdmi_phy c9a0600.hdmi-phy: supply vddio not found, using dummy regulator
[    4.956013] arm-smmu cd00000.iommu: FSYNR0 = 00000021 [S1CBNDX=0 PNU PLVL=1]
[    4.961055] arm-smmu cd00000.iommu: FSR    = 00000402 [Format=2 TF], SID=0x0
[    4.967917] msm_hdmi_phy c9a0600.hdmi-phy: supply vcca not found, using dummy regulator
[    4.974565] arm-smmu cd00000.iommu: FSYNR0 = 00000021 [S1CBNDX=0 PNU PLVL=1]
[    4.977628] arm-smmu cd00000.iommu: FSR    = 00000402 [Format=2 TF], SID=0x0
[    4.984122] Bluetooth: hci0: setting up wcn399x
[    4.989670] arm-smmu cd00000.iommu: FSYNR0 = 00000021 [S1CBNDX=0 PNU PLVL=1]


Konrad