[PATCH RFC 2/2] arm: dts: marvell: armada-38x: add description for usb phys

[Josua Mayer]

Am 15.07.24 um 20:12 schrieb Andrew Lunn:
> On Mon, Jul 15, 2024 at 07:47:30PM +0200, Josua Mayer wrote:
>> Armada 38x has 3x USB-2.0 utmi phys. They are almost identical to the 2x
>> utmi phys on armada 8k.
>>
>> Add descriptions for all 3 phy ports.
>>
>> Also add a syscon node covering just the usb configuration registers.
>> Armada 8K have a syscon node covering configuration registers for
>> various functions including pinmux, woith dirvers using syscon framework
> woith -> with
>
>> for register access.
>>
>> Armada 388 has various drivers directly claiming some of those
>> configuration registers. Hence a similar syscon node would compete for
>> resources with these drivers.
> Do these drivers make exclusive use of these registers? Or are
> multiple drivers using the same registers and you need something to
> mediate in order to have atomic access?

On Armada 38x these drivers exclusively use their own registers.

I suspect armada  8k was trying to avoid declaring lots of tiny ranges,
by using a syscon node.

The syscon registers accessed by cp110-utmi driver are exclusively
for usb and not accessed elsewhere.

>
> In the old days, a register space could be mapped into multiple
> drivers, so long as all the drivers agreed to it. There are probably
> orion5x, kirkwood era mvebu drivers doing this.
>  
> 	Andrew