[PATCH RFC 1/2] phy: mvebu-cp110-utmi: add support for armada-380 utmi phys

[Andrew Lunn]

> @@ -191,8 +196,15 @@ static int mvebu_cp110_utmi_phy_power_on(struct phy *phy)
>  	struct mvebu_cp110_utmi_port *port = phy_get_drvdata(phy);
>  	struct mvebu_cp110_utmi *utmi = port->priv;
>  	struct device *dev = &phy->dev;
> +	const void *match;
> +	enum mvebu_cp110_utmi_type type;
>  	int ret;
>  	u32 reg;
> +	u32 sel;
> +
> +	match = of_device_get_match_data(dev);
> +	if (match)
> +		type = (enum mvebu_cp110_utmi_type)(uintptr_t)match;
>  
>  	/* It is necessary to power off UTMI before configuration */
>  	ret = mvebu_cp110_utmi_phy_power_off(phy);
> @@ -208,16 +220,38 @@ static int mvebu_cp110_utmi_phy_power_on(struct phy *phy)
>  	 * to UTMI0 or to UTMI1 PHY port, but not to both.
>  	 */
>  	if (port->dr_mode == USB_DR_MODE_PERIPHERAL) {
> +		switch (type) {

Just looking at this, i'm surprised there is not a warning about
type possibly being uninitialled. 

> @@ -285,6 +320,8 @@ static int mvebu_cp110_utmi_phy_probe(struct platform_device *pdev)
>  	struct mvebu_cp110_utmi *utmi;
>  	struct phy_provider *provider;
>  	struct device_node *child;
> +	const void *match;
> +	enum mvebu_cp110_utmi_type type;
>  	u32 usb_devices = 0;
>  
>  	utmi = devm_kzalloc(dev, sizeof(*utmi), GFP_KERNEL);
> @@ -293,6 +330,10 @@ static int mvebu_cp110_utmi_phy_probe(struct platform_device *pdev)
>  
>  	utmi->dev = dev;
>  
> +	match = of_device_get_match_data(dev);
> +	if (match)
> +		type = (enum mvebu_cp110_utmi_type)(uintptr_t)match;
> +
>  	/* Get system controller region */
>  	utmi->syscon = syscon_regmap_lookup_by_phandle(dev->of_node,
>  						       "marvell,system-controller");
> @@ -326,6 +367,18 @@ static int mvebu_cp110_utmi_phy_probe(struct platform_device *pdev)
>  			return -ENOMEM;
>  		}
>  
> +		/* Get port memory region */
> +		switch (type) {

Same here.

	Andrew