[PATCH 04/47] arm64: dts: qcom: qcs9100: Add QCS9100 RIDE board dts

[Krzysztof Kozlowski]

On 03/07/2024 04:58, Tengfei Fan wrote:
> Add support for the QCS9100 RIDE board dts. The current QCS9100 RIDE
> board dts is directly renamed from the SA8775p RIDE board dts.
> The difference between the current QCS9100 RIDE board and the SA8775p
> RIDE board lies solely in the replacement of the SA8775p SoC with the
> QCS9100 SoC, all other board resources remain the same.
> The following items have been updated:
>   - use QCS9100-related compatible names for this board dts.
>   - replace the inclusion of sa8775p.dtsi with qcs9100.dtsi.
>   - replace the inclusion of sa8775p-pmics.dtsi with qcs9100-pmics.dtsi
> 
> Signed-off-by: Tengfei Fan <quic_tengfan at quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/Makefile                         | 2 +-
>  .../boot/dts/qcom/{sa8775p-ride.dts => qcs9100-ride.dts}  | 8 ++++----
>  2 files changed, 5 insertions(+), 5 deletions(-)
>  rename arch/arm64/boot/dts/qcom/{sa8775p-ride.dts => qcs9100-ride.dts} (99%)
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 5576c7d6ea06..a7a3792b0691 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -103,6 +103,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qrb2210-rb1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qrb4210-rb2.dtb
> @@ -112,7 +113,6 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qru1000-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8540p-ride.dtb
> -dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-acer-aspire1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
> similarity index 99%
> rename from arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> rename to arch/arm64/boot/dts/qcom/qcs9100-ride.dts
> index 26ad05bd3b3f..2415d34b8aa5 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
> @@ -8,12 +8,12 @@
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>  
> -#include "sa8775p.dtsi"
> -#include "sa8775p-pmics.dtsi"
> +#include "qcs9100.dtsi"
> +#include "qcs9100-pmics.dtsi"
>  
>  / {
> -	model = "Qualcomm SA8775P Ride";
> -	compatible = "qcom,sa8775p-ride", "qcom,sa8775p";
> +	model = "Qualcomm QCS9100 Ride";
> +	compatible = "qcom,qcs9100-ride", "qcom,qcs9100";

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

Your own internal guideline tells you to perform above tests, doesn't it?

Best regards,
Krzysztof