[PATCH v3 17/17] arm64: dts: qcom: sm8650: Fix UFS PHY clocks

[Manivannan Sadhasivam]

QMP PHY used in SM8650 requires 3 clocks:

* ref - 19.2MHz reference clock from RPMh
* ref_aux - Auxiliary reference clock from GCC
* qref - QREF clock from TCSR

Fixes: 10e024671295 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8650.dtsi | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 942e602bfc97..464b871ebcb7 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -2476,10 +2476,12 @@ ufs_mem_phy: phy at 1d80000 {
 			compatible = "qcom,sm8650-qmp-ufs-phy";
 			reg = <0 0x01d80000 0 0x2000>;
 
-			clocks = <&tcsr TCSR_UFS_CLKREF_EN>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&tcsr TCSR_UFS_CLKREF_EN>;
 			clock-names = "ref",
-				      "ref_aux";
+				      "ref_aux",
+				      "qref";
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";

-- 
2.25.1