[PATCH 11/14] arm64: dts: qcom: sm8450: Drop PCIE_AUX_CLK from pcie_phy node

[Manivannan Sadhasivam]

PCIe PHY hw doesn't require PCIE_AUX_CLK for functioning. This clock is
only required by the PCIe controller. Hence drop it from pcie_phy node.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 01e4dfc4babd..1e0091dabaf1 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1830,13 +1830,11 @@ pcie0_phy: phy at 1c06000 {
 			compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy";
 			reg = <0 0x01c06000 0 0x2000>;
 
-			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
-				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+			clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_CLKREF_EN>,
 				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
 				 <&gcc GCC_PCIE_0_PIPE_CLK>;
-			clock-names = "aux",
-				      "cfg_ahb",
+			clock-names = "cfg_ahb",
 				      "ref",
 				      "rchng",
 				      "pipe";

-- 
2.25.1