[PATCH 03/14] arm64: dts: qcom: ipq8074: Drop PCIE_AUX_CLK from pcie_phy nodes

[Manivannan Sadhasivam]

PCIe PHY hw doesn't require PCIE_AUX_CLK for functioning. This clock is
only required by the PCIe controller. Hence drop it from pcie_phy nodes.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index cf295bed3299..6ae6833e8969 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -201,11 +201,9 @@ pcie_qmp0: phy at 84000 {
 			compatible = "qcom,ipq8074-qmp-gen3-pcie-phy";
 			reg = <0x00084000 0x1000>;
 
-			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
-				 <&gcc GCC_PCIE0_AHB_CLK>,
+			clocks = <&gcc GCC_PCIE0_AHB_CLK>,
 				 <&gcc GCC_PCIE0_PIPE_CLK>;
-			clock-names = "aux",
-				      "cfg_ahb",
+			clock-names = "cfg_ahb",
 				      "pipe";
 
 			clock-output-names = "pcie20_phy0_pipe_clk";
@@ -224,11 +222,9 @@ pcie_qmp1: phy at 8e000 {
 			compatible = "qcom,ipq8074-qmp-pcie-phy";
 			reg = <0x0008e000 0x1000>;
 
-			clocks = <&gcc GCC_PCIE1_AUX_CLK>,
-				 <&gcc GCC_PCIE1_AHB_CLK>,
+			clocks = <&gcc GCC_PCIE1_AHB_CLK>,
 				 <&gcc GCC_PCIE1_PIPE_CLK>;
-			clock-names = "aux",
-				      "cfg_ahb",
+			clock-names = "cfg_ahb",
 				      "pipe";
 
 			clock-output-names = "pcie20_phy1_pipe_clk";

-- 
2.25.1