[PATCH 05/14] phy: ti: phy-j721e-wiz: make wiz_clock_init callable multiple times

[Vinod Koul]

On 15-01-24, 17:14, Thomas Richard wrote:
> For suspend and resume support, wiz_clock_init needs to be called
> multiple times.
> Add a parameter to wiz_clock_init to be able to skip clocks
> registration.
> 
> Based on the work of Théo Lebrun <theo.lebrun at bootlin.com>
> 
> Signed-off-by: Thomas Richard <thomas.richard at bootlin.com>
> ---
>  drivers/phy/ti/phy-j721e-wiz.c | 60 +++++++++++++++++++++++++-----------------
>  1 file changed, 36 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c
> index fc3cd98c60ff..09f7edf16562 100644
> --- a/drivers/phy/ti/phy-j721e-wiz.c
> +++ b/drivers/phy/ti/phy-j721e-wiz.c
> @@ -1076,7 +1076,7 @@ static int wiz_clock_register(struct wiz *wiz)
>  	return ret;
>  }
>  
> -static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
> +static int wiz_clock_init(struct wiz *wiz, struct device_node *node, bool probe)
>  {
>  	const struct wiz_clk_mux_sel *clk_mux_sel = wiz->clk_mux_sel;
>  	struct device *dev = wiz->dev;
> @@ -1087,14 +1087,36 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
>  	int ret;
>  	int i;
>  
> -	clk = devm_clk_get(dev, "core_ref_clk");
> -	if (IS_ERR(clk)) {
> -		dev_err(dev, "core_ref_clk clock not found\n");
> -		ret = PTR_ERR(clk);
> -		return ret;
> +	if (probe) {
> +		clk = devm_clk_get(dev, "core_ref_clk");
> +		if (IS_ERR(clk)) {
> +			dev_err(dev, "core_ref_clk clock not found\n");
> +			ret = PTR_ERR(clk);
> +			return ret;
> +		}
> +		wiz->input_clks[WIZ_CORE_REFCLK] = clk;
> +
> +		if (wiz->data->pma_cmn_refclk1_int_mode) {
> +			clk = devm_clk_get(dev, "core_ref1_clk");
> +			if (IS_ERR(clk)) {
> +				dev_err(dev, "core_ref1_clk clock not found\n");
> +				ret = PTR_ERR(clk);
> +				return ret;
> +			}
> +			wiz->input_clks[WIZ_CORE_REFCLK1] = clk;
> +		}
> +
> +		clk = devm_clk_get(dev, "ext_ref_clk");
> +		if (IS_ERR(clk)) {
> +			dev_err(dev, "ext_ref_clk clock not found\n");
> +			ret = PTR_ERR(clk);
> +			return ret;
> +		}
> +		wiz->input_clks[WIZ_EXT_REFCLK] = clk;
>  	}
> -	wiz->input_clks[WIZ_CORE_REFCLK] = clk;
>  
> +
> +	clk = wiz->input_clks[WIZ_CORE_REFCLK];
>  	rate = clk_get_rate(clk);
>  	if (rate >= 100000000)
>  		regmap_field_write(wiz->pma_cmn_refclk_int_mode, 0x1);
> @@ -1121,14 +1143,7 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
>  	}
>  
>  	if (wiz->data->pma_cmn_refclk1_int_mode) {
> -		clk = devm_clk_get(dev, "core_ref1_clk");
> -		if (IS_ERR(clk)) {
> -			dev_err(dev, "core_ref1_clk clock not found\n");
> -			ret = PTR_ERR(clk);
> -			return ret;
> -		}
> -		wiz->input_clks[WIZ_CORE_REFCLK1] = clk;
> -
> +		clk = wiz->input_clks[WIZ_CORE_REFCLK1];
>  		rate = clk_get_rate(clk);
>  		if (rate >= 100000000)
>  			regmap_field_write(wiz->pma_cmn_refclk1_int_mode, 0x1);
> @@ -1136,20 +1151,17 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
>  			regmap_field_write(wiz->pma_cmn_refclk1_int_mode, 0x3);
>  	}
>  
> -	clk = devm_clk_get(dev, "ext_ref_clk");
> -	if (IS_ERR(clk)) {
> -		dev_err(dev, "ext_ref_clk clock not found\n");
> -		ret = PTR_ERR(clk);
> -		return ret;
> -	}
> -	wiz->input_clks[WIZ_EXT_REFCLK] = clk;
> -
> +	clk = wiz->input_clks[WIZ_EXT_REFCLK];
>  	rate = clk_get_rate(clk);
>  	if (rate >= 100000000)
>  		regmap_field_write(wiz->pma_cmn_refclk_mode, 0x0);
>  	else
>  		regmap_field_write(wiz->pma_cmn_refclk_mode, 0x2);
>  
> +	/* What follows is about registering clocks. */
> +	if (!probe)
> +		return 0;
> +
>  	switch (wiz->type) {
>  	case AM64_WIZ_10G:
>  	case J7200_WIZ_10G:
> @@ -1592,7 +1604,7 @@ static int wiz_probe(struct platform_device *pdev)
>  		goto err_get_sync;
>  	}
>  
> -	ret = wiz_clock_init(wiz, node);
> +	ret = wiz_clock_init(wiz, node, true);

You are calling it one once? So what am I missing

-- 
~Vinod