[PATCH 3/3] phy: rockchip: Add Samsung HDMI/DP Combo PHY driver

Cristian Ciocaltea cristian.ciocaltea at collabora.com
Fri Jan 19 15:22:25 PST 2024


Hi Sebastian,

On 1/20/24 00:47, Sebastian Reichel wrote:
> Hi Cristian,
> 
> On Fri, Jan 19, 2024 at 09:38:03PM +0200, Cristian Ciocaltea wrote:
>> Add driver for the Rockchip HDMI/eDP TX Combo PHY found on RK3588 SoC.
>>
>> The PHY is based on a Samsung IP block and supports HDMI 2.1 TMDS, FRL
>> and eDP links.  The maximum data rate is 12Gbps (HDMI 2.1 FRL), while
>> the minimum is 250Mbps (HDMI 2.1 TMDS).
>>
>> Co-developed-by: Algea Cao <algea.cao at rock-chips.com>
>> Signed-off-by: Algea Cao <algea.cao at rock-chips.com>
>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
>> ---
> 
> The driver has multiple sequences looking like this (this is just one
> example of many):
> 
>> +	hdptx_write(hdptx, CMN_REG0087, 0x04);
>> +	hdptx_write(hdptx, CMN_REG0089, 0x00);
>> +	hdptx_write(hdptx, CMN_REG008A, 0x55);
>> +	hdptx_write(hdptx, CMN_REG008B, 0x25);
>> +	hdptx_write(hdptx, CMN_REG008C, 0x2c);
>> +	hdptx_write(hdptx, CMN_REG008D, 0x22);
>> +	hdptx_write(hdptx, CMN_REG008E, 0x14);
>> +	hdptx_write(hdptx, CMN_REG008F, 0x20);
>> +	hdptx_write(hdptx, CMN_REG0090, 0x00);
>> +	hdptx_write(hdptx, CMN_REG0091, 0x00);
>> +	hdptx_write(hdptx, CMN_REG0092, 0x00);
>> +	hdptx_write(hdptx, CMN_REG0093, 0x00);
>> +	hdptx_write(hdptx, CMN_REG0095, 0x00);
>> +	hdptx_write(hdptx, CMN_REG0097, 0x02);
>> +	hdptx_write(hdptx, CMN_REG0099, 0x04);
>> +	hdptx_write(hdptx, CMN_REG009A, 0x11);
>> +	hdptx_write(hdptx, CMN_REG009B, 0x00);
> 
> Instead of the repetitive calls to regmap_write, it's better to do
> it like this:
> 
> static const struct reg_sequence some_init_seq[] = {
> 	REG_SEQ0(CMN_REG0087, 0x04),
> 	REG_SEQ0(CMN_REG0089, 0x00),
> 	REG_SEQ0(CMN_REG008A, 0x55),
> 	REG_SEQ0(CMN_REG008B, 0x25),
> 	REG_SEQ0(CMN_REG008C, 0x2c),
> 	REG_SEQ0(CMN_REG008D, 0x22),
> 	REG_SEQ0(CMN_REG008E, 0x14),
> 	REG_SEQ0(CMN_REG008F, 0x20),
> 	REG_SEQ0(CMN_REG0090, 0x00),
> 	REG_SEQ0(CMN_REG0091, 0x00),
> 	REG_SEQ0(CMN_REG0092, 0x00),
> 	REG_SEQ0(CMN_REG0093, 0x00),
> 	REG_SEQ0(CMN_REG0095, 0x00),
> 	REG_SEQ0(CMN_REG0097, 0x02),
> 	REG_SEQ0(CMN_REG0099, 0x04),
> 	REG_SEQ0(CMN_REG009A, 0x11),
> 	REG_SEQ0(CMN_REG009B, 0x00),
> };
> 
> regmap_multi_reg_write(hdptx->regmap, some_init_seq, ARRAY_SIZE(some_init_seq));

Thanks for the hint!  Will try to make use of this as much as possible.

>> +static const struct of_device_id rockchip_hdptx_phy_of_match[] = {
>> +	{ .compatible = "rockchip,rk3588-hdptx-phy", },
>> +	{}
>> +};
>> +MODULE_DEVICE_TABLE(of, rockchip_hdptx_phy_of_match);
>> +
>> +static struct platform_driver rockchip_hdptx_phy_driver = {
>> +	.probe  = rockchip_hdptx_phy_probe,
>> +	.driver = {
>> +		.name = "rockchip-hdptx-phy",
>> +		.pm = &rockchip_hdptx_phy_pm_ops,
>> +		.of_match_table = of_match_ptr(rockchip_hdptx_phy_of_match),
> 
> Remove of_match_ptr(). It's a nop, since the driver depends on OF.

Right, will drop it in v2.

Regards,
Cristian



More information about the linux-phy mailing list