[PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks

[Bryan O'Donoghue]

On 15/01/2024 10:43, Dmitry Baryshkov wrote:
> On Mon, 15 Jan 2024 at 12:00, Konrad Dybcio <konrad.dybcio at linaro.org> wrote:
>>
>> On 13.01.2024 21:55, Dmitry Baryshkov wrote:
>>> Define VBUS regulator and the Type-C handling block as present on the
>>> Quacomm PMI632 PMIC.
>>>
>>> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>
>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>>> ---
>>>   arch/arm64/boot/dts/qcom/pmi632.dtsi | 30 ++++++++++++++++++++++++++++++
>>>   1 file changed, 30 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi
>>> index 4eb79e0ce40a..d6832f0b7b80 100644
>>> --- a/arch/arm64/boot/dts/qcom/pmi632.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi
>>> @@ -45,6 +45,36 @@ pmic at 2 {
>>>                #address-cells = <1>;
>>>                #size-cells = <0>;
>>>
>>> +             pmi632_vbus: usb-vbus-regulator at 1100 {
>>> +                     compatible = "qcom,pmi632-vbus-reg", "qcom,pm8150b-vbus-reg";
>>> +                     reg = <0x1100>;
>>> +                     status = "disabled";
>>> +             };
>>> +
>>> +             pmi632_typec: typec at 1500 {
>>> +                     compatible = "qcom,pmi632-typec";
>>> +                     reg = <0x1500>;
>>> +                     interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
>>> +                                  <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
>>> +                                  <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
>>> +                                  <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
>>> +                                  <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
>>> +                                  <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
>>> +                                  <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
>>> +                                  <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>;
>> This differs from the downstream irq types:
>>
>> <0x2 0x15 0x0 IRQ_TYPE_EDGE_BOTH>,
>> <0x2 0x15 0x1 IRQ_TYPE_EDGE_BOTH>,
>> <0x2 0x15 0x2 IRQ_TYPE_EDGE_RISING>,
>> <0x2 0x15 0x3 IRQ_TYPE_EDGE_RISING>,
>> <0x2 0x15 0x4 IRQ_TYPE_EDGE_BOTH>,
>> <0x2 0x15 0x5 IRQ_TYPE_EDGE_RISING>,
>> <0x2 0x15 0x6 IRQ_TYPE_EDGE_RISING>,
>> <0x2 0x15 0x7 IRQ_TYPE_EDGE_RISING>;
> 
> I must admit, I copied the IRQs from the pm8150b rather than from the
> vendor kernel.
> 
> Bryan, any idea which set of flags is more correct?

My € says 1:1 with the downstream pmi632.dtsi

qcom,typec at 1500 {
     reg = <0x1500 0x100>;
     interrupts = <0x2 0x15 0x0 IRQ_TYPE_EDGE_BOTH>,
                  <0x2 0x15 0x1 IRQ_TYPE_EDGE_BOTH>,
                  <0x2 0x15 0x2 IRQ_TYPE_EDGE_RISING>,
                  <0x2 0x15 0x3 IRQ_TYPE_EDGE_RISING>,
                  <0x2 0x15 0x4 IRQ_TYPE_EDGE_BOTH>,
                  <0x2 0x15 0x5 IRQ_TYPE_EDGE_RISING>,
                  <0x2 0x15 0x6 IRQ_TYPE_EDGE_RISING>,
                  <0x2 0x15 0x7 IRQ_TYPE_EDGE_RISING>;

     interrupt-names = "typec-or-rid-detect-change",
                       "typec-vpd-detect",
                       "typec-cc-state-change",
                       "typec-vconn-oc",
                       "typec-vbus-change",
                       "typec-attach-detach",
                       "typec-legacy-cable-detect",
                       "typec-try-snk-src-detect";
};