[PATCH 5/6] arm64: dts: qcom: qcm2290: declare VLS CLAMP register for USB3 PHY

[Dmitry Baryshkov]

The USB3 PHY on the QCM2290 platform doesn't have built-in
PCS_MISC_CLAMP_ENABLE register. Instead clamping is handled separately
via the register in the TCSR space. Declare corresponding register.

Fixes: 0c55f6229bc3 ("arm64: dts: qcom: qcm2290: Add USB3 PHY")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 arch/arm64/boot/dts/qcom/qcm2290.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index 0911fb08ed63..68b52e8faba5 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -442,6 +442,11 @@ tcsr_mutex: hwlock at 340000 {
 			#hwlock-cells = <1>;
 		};
 
+		tcsr_regs_1: syscon at 360000 {
+			compatible = "qcom,qcm2290-tcsr", "syscon";
+			reg = <0x0 0x00360000 0x0 0x20000>;
+		};
+
 		tlmm: pinctrl at 500000 {
 			compatible = "qcom,qcm2290-tlmm";
 			reg = <0x0 0x00500000 0x0 0x300000>;
@@ -690,6 +695,8 @@ usb_qmpphy: phy at 1615000 {
 
 			#phy-cells = <0>;
 
+			qcom,tcsr-reg = <&tcsr_regs_1 0x6b244>;
+
 			status = "disabled";
 		};
 

-- 
2.39.2