[PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks

[Konrad Dybcio]

On 13.01.2024 21:55, Dmitry Baryshkov wrote:
> Define VBUS regulator and the Type-C handling block as present on the
> Quacomm PMI632 PMIC.
> 
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/pmi632.dtsi | 30 ++++++++++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi
> index 4eb79e0ce40a..d6832f0b7b80 100644
> --- a/arch/arm64/boot/dts/qcom/pmi632.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi
> @@ -45,6 +45,36 @@ pmic at 2 {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> +		pmi632_vbus: usb-vbus-regulator at 1100 {
> +			compatible = "qcom,pmi632-vbus-reg", "qcom,pm8150b-vbus-reg";
> +			reg = <0x1100>;
> +			status = "disabled";
> +		};
> +
> +		pmi632_typec: typec at 1500 {
> +			compatible = "qcom,pmi632-typec";
> +			reg = <0x1500>;
> +			interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
> +				     <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
> +				     <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
> +				     <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
> +				     <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
> +				     <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
> +				     <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
> +				     <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>;
This differs from the downstream irq types:

<0x2 0x15 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x15 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x15 0x2 IRQ_TYPE_EDGE_RISING>,
<0x2 0x15 0x3 IRQ_TYPE_EDGE_RISING>,
<0x2 0x15 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x15 0x5 IRQ_TYPE_EDGE_RISING>,
<0x2 0x15 0x6 IRQ_TYPE_EDGE_RISING>,
<0x2 0x15 0x7 IRQ_TYPE_EDGE_RISING>;

Is it intended?

Thanks a lot for working on this!

Konrad