[PATCH 05/13] usb: typec: qcom-pmic-typec: allow different implementations for the PD PHY

[Konrad Dybcio]

On 13.01.2024 06:42, Dmitry Baryshkov wrote:
> Rework Qualcomm PMIC TCPM driver to allow different platform-specific
> implementations of the PD PHY interface. While majority of platforms
> has the same of register for the PD PHY, some obscure ones (PMI632) do
> not have real PD PHY support. Add proper interface between the main
> module and the PD PHY backend to allow switching the PD PHY
> implementation.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---

[...]

> @@ -366,12 +439,13 @@ int qcom_pmic_typec_pdphy_set_roles(struct pmic_typec_pdphy *pmic_typec_pdphy,
>  				 pmic_typec_pdphy->base + USB_PDPHY_MSG_CONFIG_REG,
>  				 MSG_CONFIG_PORT_DATA_ROLE |
>  				 MSG_CONFIG_PORT_POWER_ROLE,
> -				 data_role_host << 3 | power_role_src << 2);
> +				 (data_role == TYPEC_HOST ? MSG_CONFIG_PORT_DATA_ROLE : 0) |
> +				 (power_role == TYPEC_SOURCE ? MSG_CONFIG_PORT_POWER_ROLE : 0));

Was this hunk supposed to be part of this patch?

[...]

>  int qcom_pmic_typec_pdphy_probe(struct platform_device *pdev,
> -				struct pmic_typec_pdphy *pmic_typec_pdphy,
> -				struct pmic_typec_pdphy_resources *res,
> +				struct pmic_typec *tcpm,
> +				const struct pmic_typec_pdphy_resources *res,
>  				struct regmap *regmap,
>  				u32 base)
>  {
> +	struct pmic_typec_pdphy *pmic_typec_pdphy;
>  	struct device *dev = &pdev->dev;
>  	struct pmic_typec_pdphy_irq_data *irq_data;
>  	int i, ret, irq;
>  
> +	pmic_typec_pdphy = devm_kzalloc(dev, sizeof(struct pmic_typec_pdphy), GFP_KERNEL);
> +	if (!pmic_typec_pdphy)
> +		return -ENOMEM;

or simply sizeof(*pdphy) 

Konrad