[PATCH 08/13] phy: qcom: qmp-usb: drop dual-lane handling
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Fri Jan 12 21:42:45 PST 2024
Now as all dual-lane PHYs have been migrated to a new driver, drop
support for dual lanes configuration. If the PHY uses two lanes for USB,
it is symthom that it should use either a combo USB+DP or a USB-C PHY
driver.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 57 +--------------------------------
1 file changed, 1 insertion(+), 56 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index c7698369d3dc..e62539ce99a6 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -1237,15 +1237,10 @@ struct qmp_usb_offsets {
u16 pcs_usb;
u16 tx;
u16 rx;
- /* for PHYs with >= 2 lanes */
- u16 tx2;
- u16 rx2;
};
/* struct qmp_phy_cfg - per-PHY initialization config */
struct qmp_phy_cfg {
- int lanes;
-
const struct qmp_usb_offsets *offsets;
/* Init sequence for PHY blocks - serdes, tx, rx, pcs */
@@ -1285,8 +1280,6 @@ struct qmp_usb {
void __iomem *pcs_usb;
void __iomem *tx;
void __iomem *rx;
- void __iomem *tx2;
- void __iomem *rx2;
struct clk *pipe_clk;
struct clk_bulk_data *clks;
@@ -1393,8 +1386,6 @@ static const struct qmp_usb_offsets qmp_usb_offsets_v7 = {
};
static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
- .lanes = 1,
-
.offsets = &qmp_usb_offsets_v3,
.serdes_tbl = ipq8074_usb3_serdes_tbl,
@@ -1411,8 +1402,6 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
};
static const struct qmp_phy_cfg ipq9574_usb3phy_cfg = {
- .lanes = 1,
-
.offsets = &qmp_usb_offsets_ipq9574,
.serdes_tbl = ipq9574_usb3_serdes_tbl,
@@ -1429,8 +1418,6 @@ static const struct qmp_phy_cfg ipq9574_usb3phy_cfg = {
};
static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
- .lanes = 1,
-
.offsets = &qmp_usb_offsets_v3,
.serdes_tbl = msm8996_usb3_serdes_tbl,
@@ -1447,8 +1434,6 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
};
static const struct qmp_phy_cfg sa8775p_usb3_uniphy_cfg = {
- .lanes = 1,
-
.offsets = &qmp_usb_offsets_v5,
.serdes_tbl = sc8280xp_usb3_uniphy_serdes_tbl,
@@ -1467,8 +1452,6 @@ static const struct qmp_phy_cfg sa8775p_usb3_uniphy_cfg = {
};
static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = {
- .lanes = 1,
-
.offsets = &qmp_usb_offsets_v5,
.serdes_tbl = sc8280xp_usb3_uniphy_serdes_tbl,
@@ -1487,8 +1470,6 @@ static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = {
};
static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
- .lanes = 1,
-
.offsets = &qmp_usb_offsets_v3,
.serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl,
@@ -1507,8 +1488,6 @@ static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
};
static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
- .lanes = 1,
-
.offsets = &qmp_usb_offsets_v4,
.serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
@@ -1530,8 +1509,6 @@ static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
};
static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
- .lanes = 1,
-
.offsets = &qmp_usb_offsets_v4,
.serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
@@ -1553,8 +1530,6 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
};
static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
- .lanes = 1,
-
.offsets = &qmp_usb_offsets_v4,
.serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
@@ -1576,8 +1551,6 @@ static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
};
static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
- .lanes = 1,
-
.offsets = &qmp_usb_offsets_v5,
.serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
@@ -1599,7 +1572,6 @@ static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
};
static const struct qmp_phy_cfg sdx75_usb3_uniphy_cfg = {
- .lanes = 1,
.offsets = &qmp_usb_offsets_v6,
.serdes_tbl = sdx75_usb3_uniphy_serdes_tbl,
@@ -1621,8 +1593,6 @@ static const struct qmp_phy_cfg sdx75_usb3_uniphy_cfg = {
};
static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
- .lanes = 1,
-
.offsets = &qmp_usb_offsets_v5,
.serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
@@ -1644,8 +1614,6 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
};
static const struct qmp_phy_cfg x1e80100_usb3_uniphy_cfg = {
- .lanes = 1,
-
.offsets = &qmp_usb_offsets_v7,
.serdes_tbl = x1e80100_usb3_uniphy_serdes_tbl,
@@ -1780,11 +1748,6 @@ static int qmp_usb_power_on(struct phy *phy)
qmp_usb_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
qmp_usb_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
- if (cfg->lanes >= 2) {
- qmp_usb_configure_lane(qmp->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
- qmp_usb_configure_lane(qmp->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
- }
-
qmp_usb_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
if (pcs_usb)
@@ -2131,7 +2094,6 @@ static int qmp_usb_parse_dt_legacy(struct qmp_usb *qmp, struct device_node *np)
/*
* Get memory resources for the PHY:
* Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
- * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
* For single lane PHYs: pcs_misc (optional) -> 3.
*/
qmp->tx = devm_of_iomap(dev, np, 0, NULL);
@@ -2149,19 +2111,7 @@ static int qmp_usb_parse_dt_legacy(struct qmp_usb *qmp, struct device_node *np)
if (cfg->pcs_usb_offset)
qmp->pcs_usb = qmp->pcs + cfg->pcs_usb_offset;
- if (cfg->lanes >= 2) {
- qmp->tx2 = devm_of_iomap(dev, np, 3, NULL);
- if (IS_ERR(qmp->tx2))
- return PTR_ERR(qmp->tx2);
-
- qmp->rx2 = devm_of_iomap(dev, np, 4, NULL);
- if (IS_ERR(qmp->rx2))
- return PTR_ERR(qmp->rx2);
-
- qmp->pcs_misc = devm_of_iomap(dev, np, 5, NULL);
- } else {
- qmp->pcs_misc = devm_of_iomap(dev, np, 3, NULL);
- }
+ qmp->pcs_misc = devm_of_iomap(dev, np, 3, NULL);
if (IS_ERR(qmp->pcs_misc)) {
dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
@@ -2213,11 +2163,6 @@ static int qmp_usb_parse_dt(struct qmp_usb *qmp)
qmp->tx = base + offs->tx;
qmp->rx = base + offs->rx;
- if (cfg->lanes >= 2) {
- qmp->tx2 = base + offs->tx2;
- qmp->rx2 = base + offs->rx2;
- }
-
ret = qmp_usb_clk_init(qmp);
if (ret)
return ret;
--
2.39.2
More information about the linux-phy
mailing list