[PATCH V6 5/6] arm64: dts: imx8mp: add HDMI display pipeline

[Adam Ford]

On Tue, Feb 27, 2024 at 2:33 AM Marco Felsch <m.felsch at pengutronix.de> wrote:
>
> Hi Adam,
>
> thanks a lot for pushing this topic.
>
> On 24-02-26, Adam Ford wrote:
> > From: Lucas Stach <l.stach at pengutronix.de>
> >
> > This adds the DT nodes for all the peripherals that make up the
> > HDMI display pipeline.
> >
> > Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
> > Signed-off-by: Adam Ford <aford173 at gmail.com>
> > Tested-by: Marek Vasut <marex at denx.de>
> > Tested-by: Luca Ceresoli <luca.ceresoli at bootlin.com>
> > ---
> > V6:  Make LCDIF3 disabled by default
> >
> > V5:  No change
> >
> > V3:  Re-ordered the HDMI parts to properly come after irqstree_hdmi
> >      inside AIPS4.  Change size of LCDIF3 and PVI to match TRM sizes
> >      of 4KB.
> >
> > V2:  I took this from Lucas' original submission with the following:
> >      Removed extra clock from HDMI-TX since it is now part of the
> >      power domain
> >      Added interrupt-parent to PVI
> >      Changed the name of the HDMI tranmitter to fsl,imx8mp-hdmi-tx
> >      Added ports to HDMI-tx
> > ---
> >  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 95 +++++++++++++++++++++++
> >  1 file changed, 95 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > index 18bfa7d9aa7f..637b0265b0f1 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -1940,6 +1940,101 @@ irqsteer_hdmi: interrupt-controller at 32fc2000 {
> >                               clock-names = "ipg";
> >                               power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>;
> >                       };
> > +
> > +                     hdmi_pvi: display-bridge at 32fc4000 {
> > +                             compatible = "fsl,imx8mp-hdmi-pvi";
> > +                             reg = <0x32fc4000 0x1000>;
> > +                             interrupt-parent = <&irqsteer_hdmi>;
> > +                             interrupts = <12>;
> > +                             power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
>
> this node should be 'status = "disabled";' as reported by Luca else this
> node will EPROBE_DEFER. With that beeing fixed you can add my:

sorry I missed that one...and I though I was done...sigh.  I hope it's
not too late to get this into the next release.
>
> Tested-by: Marco Felsch <m.felsch at pengutronix.de>
>

I'll push a V7 tonight and add your tested-by.  Thanks for testing.

adam

> Regards,
>   Marco
>
> > +
> > +                             ports {
> > +                                     #address-cells = <1>;
> > +                                     #size-cells = <0>;
> > +
> > +                                     port at 0 {
> > +                                             reg = <0>;
> > +                                             pvi_from_lcdif3: endpoint {
> > +                                                     remote-endpoint = <&lcdif3_to_pvi>;
> > +                                             };
> > +                                     };
> > +
> > +                                     port at 1 {
> > +                                             reg = <1>;
> > +                                             pvi_to_hdmi_tx: endpoint {
> > +                                                     remote-endpoint = <&hdmi_tx_from_pvi>;
> > +                                             };
> > +                                     };
> > +                             };
> > +                     };
> > +
> > +                     lcdif3: display-controller at 32fc6000 {
> > +                             compatible = "fsl,imx8mp-lcdif";
> > +                             reg = <0x32fc6000 0x1000>;
> > +                             interrupt-parent = <&irqsteer_hdmi>;
> > +                             interrupts = <8>;
> > +                             clocks = <&hdmi_tx_phy>,
> > +                                      <&clk IMX8MP_CLK_HDMI_APB>,
> > +                                      <&clk IMX8MP_CLK_HDMI_ROOT>;
> > +                             clock-names = "pix", "axi", "disp_axi";
> > +                             power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_LCDIF>;
> > +                             status = "disabled";
> > +
> > +                             port {
> > +                                     lcdif3_to_pvi: endpoint {
> > +                                             remote-endpoint = <&pvi_from_lcdif3>;
> > +                                     };
> > +                             };
> > +                     };
> > +
> > +                     hdmi_tx: hdmi at 32fd8000 {
> > +                             compatible = "fsl,imx8mp-hdmi-tx";
> > +                             reg = <0x32fd8000 0x7eff>;
> > +                             interrupt-parent = <&irqsteer_hdmi>;
> > +                             interrupts = <0>;
> > +                             clocks = <&clk IMX8MP_CLK_HDMI_APB>,
> > +                                      <&clk IMX8MP_CLK_HDMI_REF_266M>,
> > +                                      <&clk IMX8MP_CLK_32K>,
> > +                                      <&hdmi_tx_phy>;
> > +                             clock-names = "iahb", "isfr", "cec", "pix";
> > +                             assigned-clocks = <&clk IMX8MP_CLK_HDMI_REF_266M>;
> > +                             assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>;
> > +                             power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
> > +                             reg-io-width = <1>;
> > +                             status = "disabled";
> > +
> > +                             ports {
> > +                                     #address-cells = <1>;
> > +                                     #size-cells = <0>;
> > +
> > +                                     port at 0 {
> > +                                             reg = <0>;
> > +
> > +                                             hdmi_tx_from_pvi: endpoint {
> > +                                                     remote-endpoint = <&pvi_to_hdmi_tx>;
> > +                                             };
> > +                                     };
> > +
> > +                                     port at 1 {
> > +                                             reg = <1>;
> > +                                             /* Point endpoint to the HDMI connector */
> > +                                     };
> > +                             };
> > +                     };
> > +
> > +                     hdmi_tx_phy: phy at 32fdff00 {
> > +                             compatible = "fsl,imx8mp-hdmi-phy";
> > +                             reg = <0x32fdff00 0x100>;
> > +                             clocks = <&clk IMX8MP_CLK_HDMI_APB>,
> > +                                      <&clk IMX8MP_CLK_HDMI_24M>;
> > +                             clock-names = "apb", "ref";
> > +                             assigned-clocks = <&clk IMX8MP_CLK_HDMI_24M>;
> > +                             assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
> > +                             power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>;
> > +                             #clock-cells = <0>;
> > +                             #phy-cells = <0>;
> > +                             status = "disabled";
> > +                     };
> >               };
> >
> >               pcie: pcie at 33800000 {
> > --
> > 2.43.0
> >
> >
> >