[PATCH v3 2/2] phy: starfive: Add mipi dphy tx support
Shengyang Chen
shengyang.chen at starfivetech.com
Sun Feb 25 18:56:26 PST 2024
Hi, Vinod
> -----Original Message-----
> From: Vinod Koul <vkoul at kernel.org>
> Sent: 2024年2月23日 20:12
> To: Shengyang Chen <shengyang.chen at starfivetech.com>
> Cc: devicetree at vger.kernel.org; linux-phy at lists.infradead.org;
> kishon at kernel.org; robh+dt at kernel.org; krzysztof.kozlowski+dt at linaro.org;
> conor+dt at kernel.org; p.zabel at pengutronix.de; Minda Chen
> <minda.chen at starfivetech.com>; Changhuang Liang
> <changhuang.liang at starfivetech.com>; rogerq at kernel.org;
> geert+renesas at glider.be; Keith Zhao <keith.zhao at starfivetech.com>;
> linux-kernel at vger.kernel.org
> Subject: Re: [PATCH v3 2/2] phy: starfive: Add mipi dphy tx support
>
> On 22-02-24, 08:48, Shengyang Chen wrote:
> > Hi, Vinod
> >
> > Thanks for review and comment.
> >
> > > -----Original Message-----
> > > From: Vinod Koul <vkoul at kernel.org>
> > > Sent: 2024年2月7日 18:36
> > > To: Shengyang Chen <shengyang.chen at starfivetech.com>
> > > Cc: devicetree at vger.kernel.org; linux-phy at lists.infradead.org;
> > > kishon at kernel.org; robh+dt at kernel.org;
> > > krzysztof.kozlowski+dt at linaro.org;
> > > conor+dt at kernel.org; p.zabel at pengutronix.de; Minda Chen
> > > <minda.chen at starfivetech.com>; Changhuang Liang
> > > <changhuang.liang at starfivetech.com>; rogerq at kernel.org;
> > > geert+renesas at glider.be; Keith Zhao <keith.zhao at starfivetech.com>;
> > > linux-kernel at vger.kernel.org
> > > Subject: Re: [PATCH v3 2/2] phy: starfive: Add mipi dphy tx support
> > >
> > > On 06-02-24, 14:19, Shengyang Chen wrote:
> > > > Add mipi dphy tx support for the StarFive JH7110 SoC.
> > > > It is a module which is used to receive data from DSI driver and
> > > > transfer data to DSI interface like mipi screen.
> > > >
> > > > Signed-off-by: Shengyang Chen <shengyang.chen at starfivetech.com>
> > > > ---
> > > > MAINTAINERS | 7 +
> > > > drivers/phy/starfive/Kconfig | 10 +
> > > > drivers/phy/starfive/Makefile | 1 +
> > > > drivers/phy/starfive/phy-jh7110-dphy-tx.c | 635
> > > > ++++++++++++++++++++++
> > > > 4 files changed, 653 insertions(+) create mode 100644
> > > > drivers/phy/starfive/phy-jh7110-dphy-tx.c
> > > >
> > > > diff --git a/MAINTAINERS b/MAINTAINERS index
> > > > 944b8ec33639..5e062b7393cb 100644
> > > > --- a/MAINTAINERS
> > > > +++ b/MAINTAINERS
> > > > @@ -20864,6 +20864,13 @@ S: Supported
> > > > F: Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml
> > > > F: drivers/phy/starfive/phy-jh7110-dphy-rx.c
> > > >
> > > > +STARFIVE JH7110 DPHY TX DRIVER
> > > > +M: Keith Zhao <keith.zhao at starfivetech.com>
> > > > +M: Shengyang Chen <shengyang.chen at starfivetech.com>
> > > > +S: Supported
> > > > +F: Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml
> > > > +F: drivers/phy/starfive/phy-jh7110-dphy-tx.c
> > > > +
> > > > STARFIVE JH7110 MMC/SD/SDIO DRIVER
> > > > M: William Qiu <william.qiu at starfivetech.com>
> > > > S: Supported
> > > > diff --git a/drivers/phy/starfive/Kconfig
> > > > b/drivers/phy/starfive/Kconfig index 9508e2143011..d0cdd7cb4a13
> > > > 100644
> > > > --- a/drivers/phy/starfive/Kconfig
> > > > +++ b/drivers/phy/starfive/Kconfig
> > > > @@ -15,6 +15,16 @@ config PHY_STARFIVE_JH7110_DPHY_RX
> > > > system. If M is selected, the module will be called
> > > > phy-jh7110-dphy-rx.ko.
> > > >
> > > > +config PHY_STARFIVE_JH7110_DPHY_TX
> > > > + tristate "StarFive JH7110 D-PHY TX Support"
> > > > + depends on HAS_IOMEM
> > > > + select GENERIC_PHY
> > > > + select GENERIC_PHY_MIPI_DPHY
> > > > + help
> > > > + Choose this option if you have a StarFive D-PHY TX in your
> > > > + system. If M is selected, the module will be called
> > > > + phy-jh7110-dphy-tx.ko.
> > > > +
> > > > config PHY_STARFIVE_JH7110_PCIE
> > > > tristate "Starfive JH7110 PCIE 2.0/USB 3.0 PHY support"
> > > > depends on HAS_IOMEM
> > > > diff --git a/drivers/phy/starfive/Makefile
> > > > b/drivers/phy/starfive/Makefile index b391018b7c47..eedc4a6fec15
> > > > 100644
> > > > --- a/drivers/phy/starfive/Makefile
> > > > +++ b/drivers/phy/starfive/Makefile
> > > > @@ -1,4 +1,5 @@
> > > > # SPDX-License-Identifier: GPL-2.0
> > > > obj-$(CONFIG_PHY_STARFIVE_JH7110_DPHY_RX) +=
> phy-jh7110-dphy-rx.o
> > > > +obj-$(CONFIG_PHY_STARFIVE_JH7110_DPHY_TX) +=
> phy-jh7110-dphy-tx.o
> > > > obj-$(CONFIG_PHY_STARFIVE_JH7110_PCIE) +=
> phy-jh7110-pcie.o
> > > > obj-$(CONFIG_PHY_STARFIVE_JH7110_USB) += phy-jh7110-usb.o
> > > > diff --git a/drivers/phy/starfive/phy-jh7110-dphy-tx.c
> > > > b/drivers/phy/starfive/phy-jh7110-dphy-tx.c
> > > > new file mode 100644
> > > > index 000000000000..00be118c9606
> > > > --- /dev/null
> > > > +++ b/drivers/phy/starfive/phy-jh7110-dphy-tx.c
> > > > @@ -0,0 +1,635 @@
> > > > +// SPDX-License-Identifier: GPL-2.0+
> > > > +/*
> > > > + * DPHY TX driver for the StarFive JH7110 SoC
> > > > + *
> > > > + * Copyright (C) 2023 StarFive Technology Co., Ltd.
> > > > + * Author: Keith Zhao <keith.zhao at starfivetech.com>
> > > > + * Author: Shengyang Chen <shengyang.chen at starfivetech.com> */
> > > > +
> > > > +#include <linux/clk.h>
> > > > +#include <linux/io.h>
> > > > +#include <linux/mfd/syscon.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/of.h>
> > > > +#include <linux/of_device.h>
> > > > +#include <linux/phy/phy.h>
> > > > +#include <linux/phy/phy-mipi-dphy.h> #include
> > > > +<linux/platform_device.h> #include <linux/pm_runtime.h> #include
> > > > +<linux/reset.h>
> > > > +
> > > > +#define STF_DPHY_APBIFSAIF_SYSCFG(x) (x)
> > > > +
> > > > +#define STF_DPHY_AON_POWER_READY_N_SHIFT 0x0U
> > > > +#define STF_DPHY_AON_POWER_READY_N_MASK BIT(0)
> > > > +#define STF_DPHY_CFG_L0_SWAP_SEL_SHIFT 0xCU
> > >
> > > lower case please, here and everywhere
> >
> > Sorry, I'm a little confused about this.
> > Do you mean changing '0xCU' to '0xCu'?
>
> Nope, it should be 0xcU, all the hex values should be in lower case
>
Ok I see. Thanks for reply
Will fix it in next version
> --
> ~Vinod
Best Regards,
Shengyang
More information about the linux-phy
mailing list