[PATCH v4 0/3] phy: qcom: edp: Add support for X1E80100

[Abel Vesa]

This patchset moves the v4 specific bits into version specific ops,
adds the v6 specific version ops and the compatible for X1E80100.

This patchset is dependent on:
[1] https://lore.kernel.org/all/20240220-x1e80100-phy-edp-compatible-refactor-v5-0-e8658adf5461@linaro.org/

To: Andy Gross <agross at kernel.org>
To: Bjorn Andersson <andersson at kernel.org>
To: Konrad Dybcio <konrad.dybcio at linaro.org>
To: Vinod Koul <vkoul at kernel.org>
To: Kishon Vijay Abraham I <kishon at kernel.org>
To: Rob Herring <robh+dt at kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
To: Conor Dooley <conor+dt at kernel.org>
To: Abhinav Kumar <quic_abhinavk at quicinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
To: Johan Hovold <johan at kernel.org>
To: Rob Herring <robh at kernel.org>
Cc: linux-arm-msm at vger.kernel.org
Cc: linux-phy at lists.infradead.org
Cc: devicetree at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Signed-off-by: Abel Vesa <abel.vesa at linaro.org>

Changes in v4:
- Moved out the mode setting to a different patchset [1]
- Switched to per-version functions approach, like Dmitry suggested
- Link to v3: https://lore.kernel.org/r/20231122-phy-qualcomm-edp-x1e80100-v3-0-576fc4e9559d@linaro.org

Changes in v3:
- The whole support for COM v6 register offsets has been reworked from scratch.
- The bindings now document the phy-type property. (dropped Krzysztof's R-b tag)
- New patch for adding PHY_TYPE_EDP into bindings header file.
- Link to v2: https://lore.kernel.org/r/20231122-phy-qualcomm-edp-x1e80100-v2-0-114e789f0195@linaro.org

Changes in v2:
- Added Krzysztof's R-b tag
- Re-worded commit message for bindings to suggest same PHY can work in
  both eDP and DP mode rather than being different PHY types.
- Implemented different qcom_edp_configure_ssc and
  qcom_edp_configure_pll for each version of the PHY.
- Dropped the cfg8 override in qcom_edp_phy_init
- Used enum instead of defines for PHY versions
- Link to v1: https://lore.kernel.org/r/20231122-phy-qualcomm-edp-x1e80100-v1-0-a9938990edb3@linaro.org

---
Abel Vesa (3):
      dt-bindings: phy: qcom-edp: Add X1E80100 PHY compatibles
      phy: qcom: edp: Move v4 specific settings to version ops
      phy: qcom: edp: Add v6 specific ops and X1E80100 platform support

 .../devicetree/bindings/phy/qcom,edp-phy.yaml      |   1 +
 drivers/phy/qualcomm/phy-qcom-edp.c                | 321 ++++++++++++++++++---
 2 files changed, 278 insertions(+), 44 deletions(-)
---
base-commit: f11d52ee9ab66205a0c9d1b936f6d9842e766bca
change-id: 20231122-phy-qualcomm-edp-x1e80100-a57c15fff32b

Best regards,
-- 
Abel Vesa <abel.vesa at linaro.org>