[PATCH RFC v3 1/5] dt-bindings: phy: hisi-inno-usb2: convert to YAML

[Krzysztof Kozlowski]

On 19/02/2024 22:49, Yang Xiwen wrote:
> On 2/20/2024 5:37 AM, Krzysztof Kozlowski wrote:
>> On 19/02/2024 22:35, Yang Xiwen wrote:
>>> On 2/20/2024 5:32 AM, Krzysztof Kozlowski wrote:
>>>> On 19/02/2024 22:27, Yang Xiwen via B4 Relay wrote:
>>>>> From: Yang Xiwen <forbidden405 at outlook.com>
>>>>>
>>>>> Add missing compatible "hisilicon,hi3798mv100-usb2-phy" to compatible
>>>>> list due to prior driver change.
>>>>>
>>>>> Also rename to hisilicon,inno-usb2-phy.yaml and add this name to
>>>>> compatible lists.
>>>>>
>>>>> Fixes: 3940ffc65492 ("phy: hisilicon: Add inno-usb2-phy driver for Hi3798MV100")
>>>>> Signed-off-by: Yang Xiwen <forbidden405 at outlook.com>
>>>>> ---
>>>>>    .../bindings/phy/hisilicon,inno-usb2-phy.yaml      | 95 ++++++++++++++++++++++
>>>>>    .../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 71 ----------------
>>>>>    2 files changed, 95 insertions(+), 71 deletions(-)
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/phy/hisilicon,inno-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/hisilicon,inno-usb2-phy.yaml
>>>>> new file mode 100644
>>>>> index 000000000000..1b57e0396209
>>>>> --- /dev/null
>>>>> +++ b/Documentation/devicetree/bindings/phy/hisilicon,inno-usb2-phy.yaml
>>>>> @@ -0,0 +1,95 @@
>>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>>>> +%YAML 1.2
>>>>> +---
>>>>> +$id: http://devicetree.org/schemas/phy/hisilicon,inno-usb2-phy.yaml#
>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>>> +
>>>>> +title: HiSilicon HiSTB SoCs INNO USB2 PHY device
>>>>> +
>>>>> +maintainers:
>>>>> +  - Yang Xiwen <forbidden405 at outlook.com>
>>>>> +
>>>>> +properties:
>>>>> +  compatible:
>>>>> +    items:
>>>>> +      - enum:
>>>>> +          - hisilicon,hi3798cv200-usb2-phy
>>>>> +          - hisilicon,hi3798mv100-usb2-phy
>>>>> +      - const: hisilicon,inno-usb2-phy
>>>> According to your driver hisilicon,hi3798mv100-usb2-phy and
>>>> hisilicon,inno-usb2-phy are not compatible.
>>> Ah, i didn't pay too much attention to that. I should remove the entry
>>> for hisilicon,inno-usb2-phy in the driver. Sorry for that.
>> We don't talk here about driver, although I used the driver as proof or
>> argument, because I don't have access to hardware datasheet (and no
>> intention to look there).
>>
>> What I claim is these are not compatible, so respond to this argument,
>> not some other one.
> 
> Why not? Of course they are compatible. All 3 SoCs are using 

Why? Because...

> inno-usb2-phy. The only difference here is the method to access the 

... here! Different programming interface means not compatible.

Please provide instead any argument that they are compatible, in the
meaning of Devicetree of course. You are claiming inno-usb2-phy  can be
used for hi3798mv100 and it will work fine?

> registers. They are all enabled by `writing BIT(2) to address 0x6`. In 
> the cover letter, I said the driver is actually doing things wrong. 

Cover letter does not matter, I don't even read them. Your commits matter.

> Especially the commit adding PHY_TYPE enums, the name is confusing and 
> conveys the wrong info. It's not PHY which are not compatible, it's the 
> bus. I'll fix the driver, but still the PHY hardwares are compatible 
> between these 3 SoCs.

Provide any argument.

> 
> I'll say the driver is broken from the beginning. They should move 
> write_reg function to a separate regmap driver and only left `write 
> BIT(2) to addr 0x6` to the PHY driver.
> 

Best regards,
Krzysztof