[PATCH RFC 4/4] dt-binding: phy: hisi-inno-usb2: add compatible of hisilicon,hi3798mv200-usb2-phy

[Krzysztof Kozlowski]

On 16/02/2024 16:21, Yang Xiwen via B4 Relay wrote:
> From: Yang Xiwen <forbidden405 at outlook.com>
> 
> It is accessed by direct MMIO, making "ranges" property mandatory for
> it.
> 

Please use subject prefixes matching the subsystem. You can get them for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching.

> Signed-off-by: Yang Xiwen <forbidden405 at outlook.com>
> ---
>  .../devicetree/bindings/phy/hisilicon,inno-usb2-phy.yaml       | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/hisilicon,inno-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/hisilicon,inno-usb2-phy.yaml
> index 73256eee10f9..d702878b8e6e 100644
> --- a/Documentation/devicetree/bindings/phy/hisilicon,inno-usb2-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/hisilicon,inno-usb2-phy.yaml
> @@ -16,6 +16,7 @@ properties:
>        - enum:
>            - hisilicon,hi3798cv200-usb2-phy
>            - hisilicon,hi3798mv100-usb2-phy
> +          - hisilicon,hi3798mv200-usb2-phy
>        - const: hisilicon,inno-usb2-phy
>  
>    reg:
> @@ -64,6 +65,15 @@ required:
>    - '#size-cells'
>    - resets
>  
> +if:

allOf: above.

> +  properties:
> +    compatible:
> +      contains:
> +        const: hisilicon,hi3798mv200-inno-usb2-phy
> +then:
> +  required:
> +    - ranges
So please test your DTS first.

> 

Best regards,
Krzysztof