[PATCH V4 4/6] arm64: dts: imx8mp: add HDMI irqsteer

[Luca Ceresoli]

On Sat, 10 Feb 2024 14:46:00 -0600
Adam Ford <aford173 at gmail.com> wrote:

> From: Lucas Stach <l.stach at pengutronix.de>
> 
> The HDMI irqsteer is a secondary interrupt controller within the HDMI
> subsystem that maps all HDMI peripheral IRQs into a single upstream
> IRQ line.
> 
> Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> ---
> V2:  Add my (Adam) s-o-b and re-order position under AIPS4
> ---
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 0730d4cf9bc4..9b8ab367d774 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -1927,6 +1927,19 @@ hdmi_blk_ctrl: blk-ctrl at 32fc0000 {
>  						     "hdcp", "hrv";
>  				#power-domain-cells = <1>;
>  			};
> +
> +			irqsteer_hdmi: interrupt-controller at 32fc2000 {
> +				compatible = "fsl,imx-irqsteer";
> +				reg = <0x32fc2000 0x44>;

The last register being at offset 0x44, this should be <0x32fc2000
0x48> or even <... 0x1000> as the TRM mentions a 4 kB size.

[Tested using Avnet MSC SM2S-IMX8PLUS SoM on Avnet MSC SM2-MB-EP1]
Tested-by: Luca Ceresoli <luca.ceresoli at bootlin.com>


Luca

-- 
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com