[PATCH v1 06/10] arm64: dts: rockchip: add USBDP phys on rk3588

[Sebastian Reichel]

Hi Johan,

On Sun, Feb 11, 2024 at 08:24:36PM +0100, Johan Jonker wrote:
> > +		u2phy1: usb2-phy at 4000 {
> 
>         "usb2phy@[0-9a-f]+$":

Interesting. I would have expected that to pop up in dtbs_check, but
it does not for some reason. I will fix it for all usb2phy instances
in rk3588.

> > +			compatible = "rockchip,rk3588-usb2phy";
> > +			reg = <0x4000 0x10>;
> > +			interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>;
> 
> > +			resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>;
> > +			reset-names = "phy", "apb";
> > +			clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
> > +			clock-names = "phyclk";
> > +			clock-output-names = "usb480m_phy1";
> > +			#clock-cells = <0>;
> 
> Align with the (new) documentation
> about property ordering.
>
> > +			status = "disabled";
> > +
> > +			u2phy1_otg: otg-port {
> > +				#phy-cells = <0>;
> > +				status = "disabled";
> > +			};
> > +		};
> > +	};

The above follows everything from [0], which does not specify an
order for the "standard/common  properties". For those this follows
the order of existing usb2phy nodes. Did I miss any other new
Documentation?

[0] https://www.kernel.org/doc/html/next/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node

-- Sebastian