[PATCH v1 03/10] dt-bindings: phy: add rockchip usbdp combo phy document

[Heiko Stübner]

Hi,

Am Freitag, 9. Februar 2024, 19:17:19 CET schrieb Sebastian Reichel:
> Add device tree binding document for Rockchip USBDP Combo PHY
> with Samsung IP block.
> 
> Co-developed-by: Frank Wang <frank.wang at rock-chips.com>
> Signed-off-by: Frank Wang <frank.wang at rock-chips.com>
> Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>

looks ok to me overall, but I stumbled over some spelling below.

> ---
>  .../bindings/phy/phy-rockchip-usbdp.yaml      | 166 ++++++++++++++++++
>  1 file changed, 166 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
> new file mode 100644
> index 000000000000..3375a3099038
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
> @@ -0,0 +1,166 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/phy-rockchip-usbdp.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip USBDP Combo PHY with Samsung IP block
> +
> +maintainers:
> +  - Frank Wang <frank.wang at rock-chips.com>
> +  - Zhang Yubing <yubing.zhang at rock-chips.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - rockchip,rk3588-usbdp-phy
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 4
> +
> +  clock-names:
> +    items:
> +      - const: refclk
> +      - const: immortal
> +      - const: pclk
> +      - const: utmi
> +
> +  resets:
> +    maxItems: 5
> +
> +  reset-names:
> +    items:
> +      - const: init
> +      - const: cmn
> +      - const: lane
> +      - const: pcs_apb
> +      - const: pma_apb
> +
> +  rockchip,dp-lane-mux:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 2
> +    maxItems: 4
> +    description:
> +      An array of physical Tyep-C lanes indexes. Position of an entry determines

nit: Type-C lane indexes

> +      the dp lane index, while the value of an entry indicater physical Type-C lane.

nit: indicates instead of indicater?

> +      The support dp lanes number are 2 or 4. e.g. for 2 lanes dp lanes map, we could

nit: The supported dp lane numbers ... ?


> +      have "rockchip,dp-lane-mux = <2, 3>;", assuming dp lane0 on Type-C phy lane2,
> +      dp lane1 on Type-C phy lane3. For 4 lanes dp lanes map, we could have
> +      "rockchip,dp-lane-mux = <0, 1, 2, 3>;", assuming dp lane0 on Type-C phy lane0,
> +      dp lane1 on Type-C phy lane1, dp lane2 on Type-C phy lane2, dp lane3 on Type-C
> +      phy lane3. If dp lane map by DisplayPort Alt mode, this property is not need.
> +
> +  rockchip,u2phy-grf:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to the syscon managing the 'usb2 phy general register files'.
> +
> +  rockchip,usb-grf:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to the syscon managing the 'usb general register files'.
> +
> +  rockchip,usbdpphy-grf:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to the syscon managing the 'usbdp phy general register files'.
> +
> +  rockchip,vo-grf:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to the syscon managing the 'video output general register files'.
> +      When select the dp lane mapping will request its phandle.
> +
> +  sbu1-dc-gpios:
> +    description:
> +      GPIO connected to the SBU1 line of the USB-C connector via a big resistor
> +      (~100K) to apply a DC offset for signalling the connector orientation.
> +
> +  sbu2-dc-gpios:
> +    description:
> +      GPIO connected to the SBU2 line of the USB-C connector via a big resistor
> +      (~100K) to apply a DC offset for signalling the connector orientation.
> +
> +  orientation-switch:
> +    description: Flag the port as possible handler of orientation switching
> +    type: boolean
> +
> +  mode-switch:
> +    description: Flag the port as possible handle of altmode switching

nit: also a handler ... aka add an r ?


Heiko