[PATCH v2 1/2] dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Wed Feb 7 07:07:09 PST 2024


On 06/02/2024 16:31, Daniel Golle wrote:
> Hi Krzysztof,
> 
> On Tue, Feb 06, 2024 at 11:53:55AM +0100, Krzysztof Kozlowski wrote:
>> On 05/02/2024 18:28, Daniel Golle wrote:
>>> Add bindings for the MediaTek XFI Ethernet SerDes T-PHY found in the
>>> MediaTek MT7988 SoC which can operate at various interfaces modes:
>>>
>>> via USXGMII PCS:
>>>  * USXGMII
>>>  * 10GBase-R
>>>  * 5GBase-R
>>>
>>> via LynxI SGMII PCS:
>>>  * 2500Base-X
>>>  * 1000Base-X
>>>  * Cisco SGMII (MAC side)
>>>
>>> Signed-off-by: Daniel Golle <daniel at makrotopia.org>
>>> ---
>>> v2: unify filename and compatible as requested
>>
>> Several comments, from me and Rob, were ignored. Please respond to them.
> 
> I'm sorry if I have missed something. I just checked again on
> patchwork, just in case I would have missed an email reply to this or
> any of the preceding posts of this patch as part of the old series
> going to netdev.
> 
> Comments you have made which I have addressed:
>  - removed $nodename
>  - use compatible as filename
> 
> And the only thing I found that I didn't either fix or reply to is this:
>> Can you explain what is this issue and errata about (except performance)?
> 
> Not overwriting that (undocumented) value in that (undocumented)
> register results in 10GBase-R having performance issues according to a
> commit in MediaTek's SDK, see here:
> 
> https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/a500d94cd%5E%21/#F0
> 
> Maybe Bc or SkyLake of MediaTek (added to Cc) can explain this in more
> detail?
> 
> 
> What I did miss was Rob's comment at the very bottom of this reply:
>> What is PEXTP?
> 
> I can again only answer by referencing to MediaTek's SDK sources:
> 
> https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/refs/heads/master/21.02/files/target/linux/mediatek/files-5.4/drivers/net/ethernet/mediatek/mtk_sgmii.c#96
> 
> Here this reset is called XFI_PEXTP0_GRST.
> 
> I personally find that name confusing (as this PHY has nothing to do with
> _P_ci _EX_press) and have tried to get rid of it where it isn't either part
> of official documentation or already merged drivers (like Sam's clock driver).
> 
> If there have been any other issues with this patch which I'm not aware
> of, please point them out to me.

These both cases should be explained in the binding somehow.

Best regards,
Krzysztof




More information about the linux-phy mailing list