[PATCH V8 03/12] dt-bindings: soc: imx: add missing clock and power-domains to imx8mp-hdmi-blk-ctrl

[Rob Herring]

On Sat, 03 Feb 2024 10:52:43 -0600, Adam Ford wrote:
> Per guidance from the NXP downstream kernel, if the clock is
> disabled before HDMI/LCDIF probe, LCDIF will not get pixel
> clock from HDMI PHY and throw an error:
> 
> [CRTC:39:crtc-2] vblank wait timed out
>     WARNING: CPU: 2 PID: 9 at drivers/gpu/drm/drm_atomic_helper.c:
>         1634 drm_atomic_helper_wait_for_vblanks.part.0+0x23c/0x260
> 
> Fix this by adding the fdcc clock to the hdmi_blk_ctrl.  This
> should be safe, since neither this power domain nor the dependent
> HDMI and LCDIF drivers been enabled or added to the SoC device
> tree yet.
> 
> According to Sandor Yu from NXP, "the FDCC clock is not for HDMITX
> in desgin, but it is part of HDMI domain that needed by HDMITX.
> So I think it is reasonable added it to the power domain driver."
> 
> The driver also supports two power domains which are missing from the binding
> that also fix an issue with resuming from suspend.
> 
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> ---
> V2:  Update commit message to both show error and give a bit more
>      background.
>      Add missing power domains hdcp and hdrv as pointed out by Marek Vasut
> ---
>  .../soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml     | 22 ++++++++++++-------
>  1 file changed, 14 insertions(+), 8 deletions(-)
> 

Reviewed-by: Rob Herring <robh at kernel.org>