[PATCH V8 02/12] phy: freescale: add Samsung HDMI PHY

Christophe JAILLET christophe.jaillet at wanadoo.fr
Sat Feb 3 09:12:27 PST 2024


Le 03/02/2024 à 17:52, Adam Ford a écrit :
> From: Lucas Stach <l.stach-bIcnvbaLZ9MEGnE8C9+IrQ at public.gmane.org>
> 
> This adds the driver for the Samsung HDMI PHY found on the
> i.MX8MP SoC.
> 
> Signed-off-by: Lucas Stach <l.stach-bIcnvbaLZ9MEGnE8C9+IrQ at public.gmane.org>
> Signed-off-by: Adam Ford <aford173-Re5JQEeQqe8AvxtiuMwx3w at public.gmane.org>
> Tested-by: Alexander Stein <alexander.stein-W3o+9BuWjQaZox4op4iWzw at public.gmane.org>
> ---

...

> +static int fsl_samsung_hdmi_phy_probe(struct platform_device *pdev)
> +{
> +	struct fsl_samsung_hdmi_phy *phy;
> +	int ret;
> +
> +	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
> +	if (!phy)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, phy);
> +	phy->dev = &pdev->dev;
> +
> +	phy->regs = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(phy->regs))
> +		return PTR_ERR(phy->regs);
> +
> +	phy->apbclk = devm_clk_get(phy->dev, "apb");
> +	if (IS_ERR(phy->apbclk))
> +		return dev_err_probe(phy->dev, PTR_ERR(phy->apbclk),
> +				     "failed to get apb clk\n");
> +
> +	phy->refclk = devm_clk_get(phy->dev, "ref");
> +	if (IS_ERR(phy->refclk))
> +		return dev_err_probe(phy->dev, PTR_ERR(phy->refclk),
> +				     "failed to get ref clk\n");
> +
> +	ret = clk_prepare_enable(phy->apbclk);
> +	if (ret) {
> +		dev_err(phy->dev, "failed to enable apbclk\n");
> +		return ret;
> +	}
> +
> +	pm_runtime_get_noresume(phy->dev);
> +	pm_runtime_set_active(phy->dev);
> +	pm_runtime_enable(phy->dev);
> +
> +	ret = phy_clk_register(phy);
> +	if (ret) {
> +		dev_err(&pdev->dev, "register clk failed\n");
> +		goto register_clk_failed;
> +	}
> +
> +	pm_runtime_put(phy->dev);
> +
> +	return 0;
> +
> +register_clk_failed:
> +	clk_disable_unprepare(phy->apbclk);
> +
> +	return ret;
> +}
> +
> +static int fsl_samsung_hdmi_phy_remove(struct platform_device *pdev)
> +{
> +	of_clk_del_provider(pdev->dev.of_node);

A clk_disable_unprepare(phy->apbclk) call seems to be missing here.
Or maybe devm_clk_get_enabled() should be used for 'apbclk'?

CJ

> +
> +	return 0;
> +}

...



More information about the linux-phy mailing list