[PATCH V8 06/12] arm64: dts: imx8mp: add HDMI irqsteer

[Adam Ford]

From: Lucas Stach <l.stach at pengutronix.de>

The HDMI irqsteer is a secondary interrupt controller within the HDMI
subsystem that maps all HDMI peripheral IRQs into a single upstream
IRQ line.

Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 5c54073de615..5e51a766f3d9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1399,6 +1399,19 @@ hdmi_blk_ctrl: blk-ctrl at 32fc0000 {
 						     "hdcp", "hrv";
 				#power-domain-cells = <1>;
 			};
+
+			irqsteer_hdmi: interrupt-controller at 32fc2000 {
+				compatible = "fsl,imx-irqsteer";
+				reg = <0x32fc2000 0x44>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				fsl,channel = <1>;
+				fsl,num-irqs = <64>;
+				clocks = <&clk IMX8MP_CLK_HDMI_APB>;
+				clock-names = "ipg";
+				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>;
+			};
 		};
 
 		aips5: bus at 30c00000 {
-- 
2.43.0