[PATCH v7 11/19] drm/imx: Add i.MX8qxp Display Controller interrupt controller

[Dmitry Baryshkov]

On Mon, Dec 23, 2024 at 02:41:39PM +0800, Liu Ying wrote:
> i.MX8qxp Display Controller has a built-in interrupt controller to support
> Enable/Status/Preset/Clear interrupt bit.  Add driver for it.
> 
> Reviewed-by: Maxime Ripard <mripard at kernel.org>
> Signed-off-by: Liu Ying <victor.liu at nxp.com>
> ---
> v7:
> * Fix regmap_config definition by removing name field, correcting read ranges
>   and setting max_register field.
> * Collect Maxime's R-b tag.
> 
> v6:
> * No change.
> 
> v5:
> * Replace .remove_new with .remove in dc-ic.c. (Uwe)
> 
> v4:
> * Use regmap to define register map for all registers. (Dmitry)
> * Use regmap APIs to access registers. (Dmitry)
> * Use devm_kzalloc() to drmm_kzalloc() to allocate dc_ic_data data strutures.
> * Set suppress_bind_attrs driver flag to true to avoid unnecessary sys
>   interfaces to bind/unbind the driver.
> * Take DC interrupt controller driver as a standalone driver instead of a
>   component driver.
> * Replace drmm_kcalloc() with devm_kcalloc() to allocate an array for
>   struct dc_ic_entry.
> * Call platform_get_irq() from DC interrupt controller driver to make sure
>   parent interrupt controller driver is probed first.
> 
> v3:
> * No change.
> 
> v2:
> * No change.
> 
>  drivers/gpu/drm/imx/dc/Kconfig  |   1 +
>  drivers/gpu/drm/imx/dc/Makefile |   2 +-
>  drivers/gpu/drm/imx/dc/dc-drv.c |   1 +
>  drivers/gpu/drm/imx/dc/dc-drv.h |   1 +
>  drivers/gpu/drm/imx/dc/dc-ic.c  | 282 ++++++++++++++++++++++++++++++++
>  5 files changed, 286 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/gpu/drm/imx/dc/dc-ic.c

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>

-- 
With best wishes
Dmitry