[PATCH v2 0/6] Add PCIe support for Qualcomm IPQ5332

[Varadarajan Narayanan]

Patch series adds support for enabling the PCIe controller and
UNIPHY found on Qualcomm IPQ5332 platform. PCIe0 is Gen3 X1 and
PCIe1 is Gen3 X2 are added.

v2: Combined [1] & [2]
	- take the phy driver related changes from [1]
	- drop IPQ5018 related changes
    Address review comments from [1] & [2] for the patches included in v2
    Please see individual patches for the differences between v1 and v2

    1. https://lore.kernel.org/all/20231003120846.28626-1-quic_nsekar@quicinc.com/
    2. https://lore.kernel.org/linux-arm-msm/20231214062847.2215542-1-quic_ipkumar@quicinc.com/

v1: https://lore.kernel.org/linux-arm-msm/20231214062847.2215542-1-quic_ipkumar@quicinc.com/

Nitheesh Sekar (2):
  dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy
  phy: qcom: Introduce PCIe UNIPHY 28LP driver

Praveenkumar I (4):
  dt-bindings: PCI: qcom: Add IPQ5332 SoC
  pci: qcom: Add support for IPQ5332
  arm64: dts: qcom: ipq5332: Add PCIe related nodes
  arm64: dts: qcom: ipq5332: Enable PCIe phys and controllers

 .../devicetree/bindings/pci/qcom,pcie.yaml    |   4 +
 .../bindings/phy/qcom,uniphy-pcie.yaml        |  82 +++++
 arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts   |  74 +++++
 arch/arm64/boot/dts/qcom/ipq5332.dtsi         | 214 +++++++++++-
 drivers/pci/controller/dwc/pcie-qcom.c        |   1 +
 drivers/phy/qualcomm/Kconfig                  |  12 +
 drivers/phy/qualcomm/Makefile                 |   1 +
 .../phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c  | 307 ++++++++++++++++++
 8 files changed, 693 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,uniphy-pcie.yaml
 create mode 100644 drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c


base-commit: f486c8aa16b8172f63bddc70116a0c897a7f3f02
-- 
2.34.1