[PATCH 6/8] drm/msm/dp: Add maximum width limitation for modes

[Dmitry Baryshkov]

On Mon, 2 Dec 2024 at 11:05, Xiangxu Yin <quic_xiangxuy at quicinc.com> wrote:
>
>
>
> On 11/29/2024 9:52 PM, Dmitry Baryshkov wrote:
> > On Fri, 29 Nov 2024 at 09:59, Xiangxu Yin <quic_xiangxuy at quicinc.com> wrote:
> >>
> >> Introduce a maximum width constraint for modes during validation. This
> >> ensures that the modes are filtered based on hardware capabilities,
> >> specifically addressing the line buffer limitations of individual pipes.
> >
> > This doesn't describe, why this is necessary. What does "buffer
> > limitations of individual pipes" mean?
> > If the platforms have hw capabilities like being unable to support 8k
> > or 10k, it should go to platform data
> >
> It's SSPP line buffer limitation for this platform and only support to 2160 mode width.
> Then, shall I add max_width config to struct msm_dp_desc in next patch? for other platform will set defualt value to ‘DP_MAX_WIDTH 7680'

SSPP line buffer limitations are to be handled in the DPU driver. The
DP driver shouldn't care about those.

> >>
> >> Signed-off-by: Xiangxu Yin <quic_xiangxuy at quicinc.com>
> >> ---
> >>  drivers/gpu/drm/msm/dp/dp_display.c |  3 +++
> >>  drivers/gpu/drm/msm/dp/dp_display.h |  1 +
> >>  drivers/gpu/drm/msm/dp/dp_panel.c   | 13 +++++++++++++
> >>  drivers/gpu/drm/msm/dp/dp_panel.h   |  1 +
> >>  4 files changed, 18 insertions(+)


-- 
With best wishes
Dmitry