[PATCH v3 2/3] arm64: dts: qcom: sm8550: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk

[Neil Armstrong]

Remove the dummy pcie-1-phy-aux-clk clock and replace with the pcie1_phy
provided QMP_PCIE_PHY_AUX_CLK.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8550-hdk.dts |  4 ----
 arch/arm64/boot/dts/qcom/sm8550-mtp.dts |  4 ----
 arch/arm64/boot/dts/qcom/sm8550-qrd.dts |  8 --------
 arch/arm64/boot/dts/qcom/sm8550.dtsi    | 13 ++++---------
 4 files changed, 4 insertions(+), 25 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
index 12d60a0ee095..ccff744dcd14 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
@@ -979,10 +979,6 @@ &pcie1_phy {
 	status = "okay";
 };
 
-&pcie_1_phy_aux_clk {
-	clock-frequency = <1000>;
-};
-
 &pm8550_gpios {
 	sdc2_card_det_n: sdc2-card-det-state {
 		pins = "gpio12";
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 3d4ad5aac70f..1fa7c4492057 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -739,10 +739,6 @@ &mdss_dp0_out {
 	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
 };
 
-&pcie_1_phy_aux_clk {
-	clock-frequency = <1000>;
-};
-
 &pcie0 {
 	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 92f015017418..da3cfa697969 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -810,10 +810,6 @@ &mdss_dp0_out {
 	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
 };
 
-&pcie_1_phy_aux_clk {
-	status = "disabled";
-};
-
 &pcie0 {
 	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
@@ -907,10 +903,6 @@ &pon_resin {
 	status = "okay";
 };
 
-&pcie_1_phy_aux_clk {
-	clock-frequency = <1000>;
-};
-
 &qupv3_id_0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index bc5aeb05ffc3..143994d1e6ca 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -58,11 +58,6 @@ bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
 			clock-mult = <1>;
 			clock-div = <2>;
 		};
-
-		pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-		};
 	};
 
 	cpus {
@@ -776,8 +771,8 @@ gcc: clock-controller at 100000 {
 			#power-domain-cells = <1>;
 			clocks = <&bi_tcxo_div2>, <&sleep_clk>,
 				 <&pcie0_phy>,
-				 <&pcie1_phy>,
-				 <&pcie_1_phy_aux_clk>,
+				 <&pcie1_phy QMP_PCIE_PIPE_CLK>,
+				 <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>,
 				 <&ufs_mem_phy 0>,
 				 <&ufs_mem_phy 1>,
 				 <&ufs_mem_phy 2>,
@@ -1928,8 +1923,8 @@ pcie1_phy: phy at 1c0e000 {
 
 			power-domains = <&gcc PCIE_1_PHY_GDSC>;
 
-			#clock-cells = <0>;
-			clock-output-names = "pcie1_pipe_clk";
+			#clock-cells = <1>;
+			clock-output-names = "pcie1_pipe_clk", "pcie1_phy_aux_clk";
 
 			#phy-cells = <0>;
 

-- 
2.34.1