[PATCH 2/2] phy: sophgo: Add USB 2.0 PHY driver for Sophgo CV18XX/SG200X

Inochi Amaoto inochiama at outlook.com
Fri Apr 12 00:22:25 PDT 2024


Add USB 2.0 PHY driver for Sophgo CV18XX/SG200X.

Signed-off-by: Inochi Amaoto <inochiama at outlook.com>
---
 drivers/phy/Kconfig                 |   1 +
 drivers/phy/Makefile                |   1 +
 drivers/phy/sophgo/Kconfig          |  19 ++
 drivers/phy/sophgo/Makefile         |   2 +
 drivers/phy/sophgo/phy-cv1800-usb.c | 381 ++++++++++++++++++++++++++++
 5 files changed, 404 insertions(+)
 create mode 100644 drivers/phy/sophgo/Kconfig
 create mode 100644 drivers/phy/sophgo/Makefile
 create mode 100644 drivers/phy/sophgo/phy-cv1800-usb.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 787354b849c7..596b37ab3191 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -92,6 +92,7 @@ source "drivers/phy/renesas/Kconfig"
 source "drivers/phy/rockchip/Kconfig"
 source "drivers/phy/samsung/Kconfig"
 source "drivers/phy/socionext/Kconfig"
+source "drivers/phy/sophgo/Kconfig"
 source "drivers/phy/st/Kconfig"
 source "drivers/phy/starfive/Kconfig"
 source "drivers/phy/sunplus/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 868a220ed0f6..7ff32f0ae08a 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -31,6 +31,7 @@ obj-y					+= allwinner/	\
 					   rockchip/	\
 					   samsung/	\
 					   socionext/	\
+					   sophgo/	\
 					   st/		\
 					   starfive/	\
 					   sunplus/	\
diff --git a/drivers/phy/sophgo/Kconfig b/drivers/phy/sophgo/Kconfig
new file mode 100644
index 000000000000..b1c558de6616
--- /dev/null
+++ b/drivers/phy/sophgo/Kconfig
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for Sophgo platforms
+#
+
+if ARCH_SOPHGO || COMPILE_TEST
+
+config PHY_SOPHGO_CV1800_USB
+	tristate "Sophgo CV18XX/SG200X USB 2.0 PHY support"
+	depends on MFD_SYSCON
+	depends on USB_SUPPORT
+	select GENERIC_PHY
+	help
+	  Enable this to support the USB 2.0 PHY used with
+	  the DWC2 USB controller in Sophgo CV18XX/SG200X
+	  series SoC.
+	  If unsure, say N.
+
+endif # ARCH_SOPHGO || COMPILE_TEST
diff --git a/drivers/phy/sophgo/Makefile b/drivers/phy/sophgo/Makefile
new file mode 100644
index 000000000000..659537054cd4
--- /dev/null
+++ b/drivers/phy/sophgo/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_SOPHGO_CV1800_USB)	+= phy-cv1800-usb.o
diff --git a/drivers/phy/sophgo/phy-cv1800-usb.c b/drivers/phy/sophgo/phy-cv1800-usb.c
new file mode 100644
index 000000000000..a9c7f41406b4
--- /dev/null
+++ b/drivers/phy/sophgo/phy-cv1800-usb.c
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024 Inochi Amaoto <inochiama at outlook.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/debugfs.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/spinlock.h>
+#include <soc/sophgo/cv1800-sysctl.h>
+
+#define PHY_IDPAD_C_OW			BIT(6)
+#define PHY_IDPAD_C_SW			BIT(7)
+
+#define PHY_BASE_CLK_RATE		300000000
+#define PHY_APP_CLK_RATE		125000000
+#define PHY_LPM_CLK_RATE		12000000
+#define PHY_STB_CLK_RATE		333334
+
+#define PHY_VBUS_DET_DEBOUNCE_TIME	usecs_to_jiffies(100)
+
+struct cv1800_usb_phy {
+	struct phy *phy;
+	struct regmap *syscon;
+	spinlock_t lock;
+	struct clk *usb_phy_clk;
+	struct clk *usb_app_clk;
+	struct clk *usb_lpm_clk;
+	struct clk *usb_stb_clk;
+	struct gpio_descs *switch_gpios;
+	struct gpio_desc *vbus_det_gpio;
+	int vbus_det_irq;
+	struct delayed_work vbus_work;
+	bool enable_otg;
+};
+
+static int cv1800_usb_phy_set_idpad(struct cv1800_usb_phy *phy,
+				    bool is_host)
+{
+	unsigned long flags;
+	unsigned int regval = 0;
+	int ret;
+
+	if (is_host)
+		regval = PHY_IDPAD_C_OW;
+	else
+		regval = PHY_IDPAD_C_OW | PHY_IDPAD_C_SW;
+
+	spin_lock_irqsave(&phy->lock, flags);
+	ret = regmap_update_bits(phy->syscon, CV1800_USB_PHY_CTRL_REG,
+				 PHY_IDPAD_C_OW | PHY_IDPAD_C_SW,
+				 regval);
+	spin_unlock_irqrestore(&phy->lock, flags);
+
+	return ret;
+}
+
+static void cv1800_usb_phy_set_gpio(struct cv1800_usb_phy *phy,
+				    bool is_host)
+{
+	unsigned int i, ndescs;
+	struct gpio_desc **gpios;
+
+	if (!phy->switch_gpios)
+		return;
+
+	ndescs = phy->switch_gpios->ndescs;
+	gpios = phy->switch_gpios->desc;
+
+	if (is_host) {
+		for (i = 0; i < ndescs; i++)
+			gpiod_set_value_cansleep(gpios[i], 0);
+	} else {
+		for (i = 0; i < ndescs; i++)
+			gpiod_set_value_cansleep(gpios[ndescs - 1 - i], 1);
+	}
+}
+
+static int cv1800_usb_phy_set_mode_internal(struct cv1800_usb_phy *phy,
+					    bool is_host)
+{
+	int ret = cv1800_usb_phy_set_idpad(phy, is_host);
+
+	if (ret < 0)
+		return ret;
+
+	cv1800_usb_phy_set_gpio(phy, is_host);
+
+	return 0;
+}
+
+static ssize_t dr_mode_write(struct file *file, const char __user *_buf,
+			     size_t count, loff_t *ppos)
+{
+	struct seq_file *seq = file->private_data;
+	struct cv1800_usb_phy *phy = seq->private;
+	bool is_host;
+	char buf[16];
+
+	if (copy_from_user(&buf, _buf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	if (sysfs_streq(buf, "host")) {
+		phy->enable_otg = false;
+		is_host = true;
+	} else if (sysfs_streq(buf, "peripheral")) {
+		phy->enable_otg = false;
+		is_host = false;
+	} else if (sysfs_streq(buf, "otg") && phy->vbus_det_irq > 0) {
+		phy->enable_otg = true;
+	} else
+		return -EINVAL;
+
+	if (phy->enable_otg)
+		queue_delayed_work(system_wq, &phy->vbus_work,
+				   PHY_VBUS_DET_DEBOUNCE_TIME);
+	else
+		cv1800_usb_phy_set_mode_internal(phy, is_host);
+
+	return count;
+}
+
+static int dr_mode_show(struct seq_file *seq, void *v)
+{
+	struct cv1800_usb_phy *phy = seq->private;
+	unsigned long flags;
+	unsigned int regval;
+	bool is_host = true;
+	int ret;
+
+	spin_lock_irqsave(&phy->lock, flags);
+	ret = regmap_read(phy->syscon, CV1800_USB_PHY_CTRL_REG, &regval);
+	spin_unlock_irqrestore(&phy->lock, flags);
+
+	if (ret)
+		return ret;
+
+	if (regval & PHY_IDPAD_C_SW)
+		is_host = false;
+
+	if (phy->enable_otg)
+		seq_puts(seq, "otg: ");
+	seq_puts(seq, is_host ? "host\n" : "peripheral\n");
+
+	return 0;
+}
+
+DEFINE_SHOW_STORE_ATTRIBUTE(dr_mode);
+
+static int cv1800_usb_phy_set_clock(struct cv1800_usb_phy *phy)
+{
+	int ret;
+
+	ret = clk_set_rate(phy->usb_phy_clk, PHY_BASE_CLK_RATE);
+	if (ret)
+		return ret;
+
+	ret = clk_set_rate(phy->usb_app_clk, PHY_APP_CLK_RATE);
+	if (ret)
+		return ret;
+
+	ret = clk_set_rate(phy->usb_lpm_clk, PHY_LPM_CLK_RATE);
+	if (ret)
+		return ret;
+
+	ret = clk_set_rate(phy->usb_stb_clk, PHY_STB_CLK_RATE);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int cv1800_usb_phy_set_mode(struct phy *_phy,
+				   enum phy_mode mode, int submode)
+{
+	struct cv1800_usb_phy *phy = phy_get_drvdata(_phy);
+	bool is_host;
+
+	switch (mode) {
+	case PHY_MODE_USB_DEVICE:
+		is_host = false;
+		phy->enable_otg = false;
+		break;
+	case PHY_MODE_USB_HOST:
+		is_host = true;
+		phy->enable_otg = false;
+		break;
+	case PHY_MODE_USB_OTG:
+		/* phy only supports soft OTG when VBUS_DET pin is connected. */
+		if (phy->vbus_det_irq > 0) {
+			phy->enable_otg = true;
+			queue_delayed_work(system_wq, &phy->vbus_work,
+					   PHY_VBUS_DET_DEBOUNCE_TIME);
+		}
+		return 0;
+	default:
+		return -EINVAL;
+	}
+
+	return cv1800_usb_phy_set_mode_internal(phy, is_host);
+}
+
+static const struct phy_ops cv1800_usb_phy_ops = {
+	.set_mode	= cv1800_usb_phy_set_mode,
+	.owner		= THIS_MODULE,
+};
+
+static void cv1800_usb_phy_vbus_switch(struct work_struct *work)
+{
+	struct cv1800_usb_phy *phy =
+		container_of(work, struct cv1800_usb_phy, vbus_work.work);
+	int state = gpiod_get_value_cansleep(phy->vbus_det_gpio);
+
+	cv1800_usb_phy_set_mode_internal(phy, state == 0);
+}
+
+static irqreturn_t cv1800_usb_phy_vbus_det_irq(int irq, void *dev_id)
+{
+	struct cv1800_usb_phy *phy = dev_id;
+
+	if (phy->enable_otg)
+		queue_delayed_work(system_wq, &phy->vbus_work,
+				   PHY_VBUS_DET_DEBOUNCE_TIME);
+	return IRQ_HANDLED;
+}
+
+static void cv1800_usb_phy_init_mode(struct device *dev,
+				     struct cv1800_usb_phy *phy)
+{
+	const char *mode;
+	bool is_host;
+
+	phy->enable_otg = false;
+
+	device_property_read_string(dev, "dr_mode", &mode);
+	if (!mode)
+		mode = "host";
+
+	if (!strcmp(mode, "host"))
+		is_host = true;
+	else if (!strcmp(mode, "peripheral"))
+		is_host = false;
+	else if (phy->vbus_det_irq > 0)
+		phy->enable_otg = true;
+
+	if (phy->enable_otg)
+		queue_delayed_work(system_wq, &phy->vbus_work, 0);
+	else
+		cv1800_usb_phy_set_mode_internal(phy, is_host);
+}
+
+static int cv1800_usb_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device *parent = dev->parent;
+	struct cv1800_usb_phy *phy;
+	struct phy_provider *phy_provider;
+	int ret;
+
+	if (!parent)
+		return -ENODEV;
+
+	phy = devm_kmalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->syscon = syscon_node_to_regmap(parent->of_node);
+	if (IS_ERR_OR_NULL(phy->syscon))
+		return -ENODEV;
+
+	spin_lock_init(&phy->lock);
+
+	phy->usb_phy_clk = devm_clk_get_enabled(dev, "phy");
+	if (IS_ERR(phy->usb_phy_clk))
+		return dev_err_probe(dev, PTR_ERR(phy->usb_phy_clk),
+			"Failed to get phy clock\n");
+
+	phy->usb_app_clk = devm_clk_get_enabled(dev, "app");
+	if (IS_ERR(phy->usb_app_clk))
+		return dev_err_probe(dev, PTR_ERR(phy->usb_app_clk),
+			"Failed to get app clock\n");
+
+	phy->usb_lpm_clk = devm_clk_get_enabled(dev, "lpm");
+	if (IS_ERR(phy->usb_lpm_clk))
+		return dev_err_probe(dev, PTR_ERR(phy->usb_lpm_clk),
+			"Failed to get lpm clock\n");
+
+	phy->usb_stb_clk = devm_clk_get_enabled(dev, "stb");
+	if (IS_ERR(phy->usb_stb_clk))
+		return dev_err_probe(dev, PTR_ERR(phy->usb_stb_clk),
+			"Failed to get stb clock\n");
+
+	phy->phy = devm_phy_create(dev, NULL, &cv1800_usb_phy_ops);
+	if (IS_ERR(phy->phy))
+		return dev_err_probe(dev, PTR_ERR(phy->phy),
+			"Failed to create phy\n");
+
+	ret = cv1800_usb_phy_set_clock(phy);
+	if (ret)
+		return ret;
+
+	phy->switch_gpios = devm_gpiod_get_array_optional(dev, "sophgo,switch",
+							  GPIOD_OUT_LOW);
+	if (IS_ERR(phy->switch_gpios))
+		return dev_err_probe(dev, PTR_ERR(phy->switch_gpios),
+			"Failed to get switch pin\n");
+
+	phy->vbus_det_gpio = devm_gpiod_get_optional(dev, "vbus_det", GPIOD_IN);
+	if (IS_ERR(phy->vbus_det_gpio))
+		return dev_err_probe(dev, PTR_ERR(phy->vbus_det_gpio),
+			"Failed to process vbus pin\n");
+
+	phy->vbus_det_irq = gpiod_to_irq(phy->vbus_det_gpio);
+	if (phy->vbus_det_irq > 0) {
+		ret = devm_request_irq(dev, phy->vbus_det_irq,
+				       cv1800_usb_phy_vbus_det_irq,
+				       IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				       "usb-vbus-det", phy);
+		if (ret)
+			return dev_err_probe(dev, ret,
+				"Failed to request vbus irq\n");
+	}
+
+	INIT_DELAYED_WORK(&phy->vbus_work, cv1800_usb_phy_vbus_switch);
+
+	debugfs_create_file("dr_mode", 0644, phy->phy->debugfs,
+			    phy, &dr_mode_fops);
+
+	phy_set_drvdata(phy->phy, phy);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	/*
+	 * phy needs to change mode twice after initialization,
+	 * otherwise the controller can not found devices attached
+	 * to the phy.
+	 */
+	cv1800_usb_phy_set_idpad(phy, false);
+	cv1800_usb_phy_set_idpad(phy, true);
+	cv1800_usb_phy_init_mode(dev, phy);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static void cv1800_usb_phy_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cv1800_usb_phy *phy = platform_get_drvdata(pdev);
+
+	if (phy->vbus_det_irq > 0)
+		devm_free_irq(dev, phy->vbus_det_irq, phy);
+
+	cancel_delayed_work_sync(&phy->vbus_work);
+}
+
+static const struct of_device_id cv1800_usb_phy_ids[] = {
+	{ .compatible = "sophgo,cv1800-usb-phy" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, cv1800_usb_phy_ids);
+
+static struct platform_driver cv1800_usb_phy_driver = {
+	.probe = cv1800_usb_phy_probe,
+	.remove_new = cv1800_usb_phy_remove,
+	.driver = {
+		.name = "cv1800-usb-phy",
+		.of_match_table = cv1800_usb_phy_ids,
+	 },
+};
+module_platform_driver(cv1800_usb_phy_driver);
+MODULE_DESCRIPTION("CV1800/SG2000 SoC USB 2.0 PHY driver");
+MODULE_LICENSE("GPL");
--
2.44.0




More information about the linux-phy mailing list