[PATCH v2 6/7] phy: qcom: qmp-pcie: add QMP PCIe PHY tables for SM8650
Neil Armstrong
neil.armstrong at linaro.org
Mon Oct 30 02:48:22 PDT 2023
Add QMP PCIe PHY support for the SM8650 platform.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 65 ++++++++++++++++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index b64598ac59f4..2af7115ef968 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -1909,6 +1909,35 @@ static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_G4_FOM_EQ_CONFIG5, 0xf2),
};
+static const struct qmp_phy_init_tbl sm8650_qmp_gen4x2_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_PI_CONTROLS, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_SO_ACC_DEFAULT_VAL_RATE3, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_IVCM_CAL_CTRL2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_DFE_3, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_VGA_CAL_MAN_VAL, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_GM_CAL, 0x0d),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_EQU_ADAPTOR_CNTRL4, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_PHPRE_CTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B0, 0xd3),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B1, 0xd3),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B3, 0x9a),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B4, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B5, 0xb6),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B6, 0xee),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B0, 0x23),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B1, 0x9b),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B2, 0x60),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B3, 0xdf),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B4, 0x43),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B5, 0x76),
+ QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B6, 0xff),
+};
+
static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x2_pcie_serdes_alt_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
@@ -3047,6 +3076,36 @@ static const struct qmp_phy_cfg sm8550_qmp_gen4x2_pciephy_cfg = {
.has_nocsr_reset = true,
};
+static const struct qmp_phy_cfg sm8650_qmp_gen4x2_pciephy_cfg = {
+ .lanes = 2,
+
+ .offsets = &qmp_pcie_offsets_v6_20,
+
+ .tbls = {
+ .serdes = sm8550_qmp_gen4x2_pcie_serdes_tbl,
+ .serdes_num = ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_serdes_tbl),
+ .tx = sm8550_qmp_gen4x2_pcie_tx_tbl,
+ .tx_num = ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_tx_tbl),
+ .rx = sm8650_qmp_gen4x2_pcie_rx_tbl,
+ .rx_num = ARRAY_SIZE(sm8650_qmp_gen4x2_pcie_rx_tbl),
+ .pcs = sm8550_qmp_gen4x2_pcie_pcs_tbl,
+ .pcs_num = ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_pcs_tbl),
+ .pcs_misc = sm8550_qmp_gen4x2_pcie_pcs_misc_tbl,
+ .pcs_misc_num = ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_pcs_misc_tbl),
+ .ln_shrd = sm8550_qmp_gen4x2_pcie_ln_shrd_tbl,
+ .ln_shrd_num = ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_ln_shrd_tbl),
+ },
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = sm8550_qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(sm8550_qmp_phy_vreg_l),
+ .regs = pciephy_v5_regs_layout,
+
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS_4_20,
+ .has_nocsr_reset = true,
+};
+
static const struct qmp_phy_cfg sa8775p_qmp_gen4x2_pciephy_cfg = {
.lanes = 2,
.offsets = &qmp_pcie_offsets_v5_20,
@@ -3820,6 +3879,12 @@ static const struct of_device_id qmp_pcie_of_match_table[] = {
}, {
.compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy",
.data = &sm8550_qmp_gen4x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8650-qmp-gen3x2-pcie-phy",
+ .data = &sm8550_qmp_gen3x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sm8650-qmp-gen4x2-pcie-phy",
+ .data = &sm8650_qmp_gen4x2_pciephy_cfg,
},
{ },
};
--
2.34.1
More information about the linux-phy
mailing list