[PATCH v5 3/6] usb: typec: nb7vpq904m: switch to DRM_AUX_BRIDGE
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Wed Oct 25 15:28:04 PDT 2023
Switch to using the new DRM_AUX_BRIDGE helper to create the
transparent DRM bridge device instead of handcoding corresponding
functionality.
Reviewed-by: Heikki Krogerus <heikki.krogerus at linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
drivers/usb/typec/mux/Kconfig | 2 +-
drivers/usb/typec/mux/nb7vpq904m.c | 44 ++----------------------------
2 files changed, 3 insertions(+), 43 deletions(-)
diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
index 65da61150ba7..07395161dd30 100644
--- a/drivers/usb/typec/mux/Kconfig
+++ b/drivers/usb/typec/mux/Kconfig
@@ -40,7 +40,7 @@ config TYPEC_MUX_NB7VPQ904M
tristate "On Semiconductor NB7VPQ904M Type-C redriver driver"
depends on I2C
depends on DRM || DRM=n
- select DRM_PANEL_BRIDGE if DRM
+ select DRM_AUX_BRIDGE if DRM_BRIDGE
select REGMAP_I2C
help
Say Y or M if your system has a On Semiconductor NB7VPQ904M Type-C
diff --git a/drivers/usb/typec/mux/nb7vpq904m.c b/drivers/usb/typec/mux/nb7vpq904m.c
index cda206cf0c38..b17826713753 100644
--- a/drivers/usb/typec/mux/nb7vpq904m.c
+++ b/drivers/usb/typec/mux/nb7vpq904m.c
@@ -11,7 +11,7 @@
#include <linux/regmap.h>
#include <linux/bitfield.h>
#include <linux/of_graph.h>
-#include <drm/drm_bridge.h>
+#include <drm/bridge/aux-bridge.h>
#include <linux/usb/typec_dp.h>
#include <linux/usb/typec_mux.h>
#include <linux/usb/typec_retimer.h>
@@ -70,8 +70,6 @@ struct nb7vpq904m {
bool swap_data_lanes;
struct typec_switch *typec_switch;
- struct drm_bridge bridge;
-
struct mutex lock; /* protect non-concurrent retimer & switch */
enum typec_orientation orientation;
@@ -297,44 +295,6 @@ static int nb7vpq904m_retimer_set(struct typec_retimer *retimer, struct typec_re
return ret;
}
-#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DRM_PANEL_BRIDGE)
-static int nb7vpq904m_bridge_attach(struct drm_bridge *bridge,
- enum drm_bridge_attach_flags flags)
-{
- struct nb7vpq904m *nb7 = container_of(bridge, struct nb7vpq904m, bridge);
- struct drm_bridge *next_bridge;
-
- if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR))
- return -EINVAL;
-
- next_bridge = devm_drm_of_get_bridge(&nb7->client->dev, nb7->client->dev.of_node, 0, 0);
- if (IS_ERR(next_bridge)) {
- dev_err(&nb7->client->dev, "failed to acquire drm_bridge: %pe\n", next_bridge);
- return PTR_ERR(next_bridge);
- }
-
- return drm_bridge_attach(bridge->encoder, next_bridge, bridge,
- DRM_BRIDGE_ATTACH_NO_CONNECTOR);
-}
-
-static const struct drm_bridge_funcs nb7vpq904m_bridge_funcs = {
- .attach = nb7vpq904m_bridge_attach,
-};
-
-static int nb7vpq904m_register_bridge(struct nb7vpq904m *nb7)
-{
- nb7->bridge.funcs = &nb7vpq904m_bridge_funcs;
- nb7->bridge.of_node = nb7->client->dev.of_node;
-
- return devm_drm_bridge_add(&nb7->client->dev, &nb7->bridge);
-}
-#else
-static int nb7vpq904m_register_bridge(struct nb7vpq904m *nb7)
-{
- return 0;
-}
-#endif
-
static const struct regmap_config nb7_regmap = {
.max_register = 0x1f,
.reg_bits = 8,
@@ -461,7 +421,7 @@ static int nb7vpq904m_probe(struct i2c_client *client)
gpiod_set_value(nb7->enable_gpio, 1);
- ret = nb7vpq904m_register_bridge(nb7);
+ ret = drm_aux_bridge_register(dev);
if (ret)
goto err_disable_gpio;
--
2.42.0
More information about the linux-phy
mailing list