[PATCH v2 3/4] PCI: epf-mhi: Add support for SA8775P

[Krzysztof Kozlowski]

On 11/10/2023 13:18, Mrinmay Sarkar wrote:
> Add support for Qualcomm Snapdragon SA8775P SoC to the EPF driver.
> SA8775P has the PID (0x0306) and supports HDMA. Currently, it has
> no fixed PCI class, so it is being advertised as "PCI_CLASS_OTHERS".
> 
> Signed-off-by: Mrinmay Sarkar <quic_msarkar at quicinc.com>
> ---
>  drivers/pci/endpoint/functions/pci-epf-mhi.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/drivers/pci/endpoint/functions/pci-epf-mhi.c b/drivers/pci/endpoint/functions/pci-epf-mhi.c
> index b7b9d3e..f05c2e4 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-mhi.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-mhi.c
> @@ -114,6 +114,22 @@ static const struct pci_epf_mhi_ep_info sm8450_info = {
>  	.flags = MHI_EPF_USE_DMA,
>  };
>  
> +static const struct pci_epf_header sa8775p_header = {
> +	.vendorid = PCI_VENDOR_ID_QCOM,
> +	.deviceid = 0x0306,
> +	.baseclass_code = PCI_CLASS_OTHERS,
> +	.interrupt_pin = PCI_INTERRUPT_INTA,
> +};
> +
> +static const struct pci_epf_mhi_ep_info sa8775p_info = {
> +	.config = &mhi_v1_config,
> +	.epf_header = &sa8775p_header,
> +	.bar_num = BAR_0,
> +	.epf_flags = PCI_BASE_ADDRESS_MEM_TYPE_32,
> +	.msi_count = 32,
> +	.mru = 0x8000,

This is almost the same (minus MHI_EPF_USE_DMA) as sm8450. Are you sure
these are not compatible?

Best regards,
Krzysztof