[PATCH v4 2/3] phy: qcom: qmp-combo: switch to DRM_AUX_BRIDGE

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Tue Oct 10 16:10:17 PDT 2023


Switch to using the new DRM_AUX_BRIDGE helper to create the
transparent DRM bridge device instead of handcoding corresponding
functionality.

Acked-by: Vinod Koul <vkoul at kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/phy/qualcomm/Kconfig              |  2 +-
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 44 ++---------------------
 2 files changed, 3 insertions(+), 43 deletions(-)

diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index d891058b7c39..b57a0e786a61 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -63,7 +63,7 @@ config PHY_QCOM_QMP_COMBO
 	depends on DRM || DRM=n
 	select GENERIC_PHY
 	select MFD_SYSCON
-	select DRM_PANEL_BRIDGE if DRM
+	select DRM_AUX_BRIDGE if DRM_BRIDGE && OF
 	help
 	  Enable this to support the QMP Combo PHY transceiver that is used
 	  with USB3 and DisplayPort controllers on Qualcomm chips.
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 5e6fc8103e9d..fbca9c0fcba4 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -21,7 +21,7 @@
 #include <linux/usb/typec.h>
 #include <linux/usb/typec_mux.h>
 
-#include <drm/drm_bridge.h>
+#include <drm/bridge/aux-bridge.h>
 
 #include <dt-bindings/phy/phy-qcom-qmp.h>
 
@@ -1419,8 +1419,6 @@ struct qmp_combo {
 	struct clk_hw dp_link_hw;
 	struct clk_hw dp_pixel_hw;
 
-	struct drm_bridge bridge;
-
 	struct typec_switch_dev *sw;
 	enum typec_orientation orientation;
 };
@@ -3191,44 +3189,6 @@ static int qmp_combo_typec_switch_register(struct qmp_combo *qmp)
 }
 #endif
 
-#if IS_ENABLED(CONFIG_DRM)
-static int qmp_combo_bridge_attach(struct drm_bridge *bridge,
-				   enum drm_bridge_attach_flags flags)
-{
-	struct qmp_combo *qmp = container_of(bridge, struct qmp_combo, bridge);
-	struct drm_bridge *next_bridge;
-
-	if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR))
-		return -EINVAL;
-
-	next_bridge = devm_drm_of_get_bridge(qmp->dev, qmp->dev->of_node, 0, 0);
-	if (IS_ERR(next_bridge)) {
-		dev_err(qmp->dev, "failed to acquire drm_bridge: %pe\n", next_bridge);
-		return PTR_ERR(next_bridge);
-	}
-
-	return drm_bridge_attach(bridge->encoder, next_bridge, bridge,
-				 DRM_BRIDGE_ATTACH_NO_CONNECTOR);
-}
-
-static const struct drm_bridge_funcs qmp_combo_bridge_funcs = {
-	.attach	= qmp_combo_bridge_attach,
-};
-
-static int qmp_combo_dp_register_bridge(struct qmp_combo *qmp)
-{
-	qmp->bridge.funcs = &qmp_combo_bridge_funcs;
-	qmp->bridge.of_node = qmp->dev->of_node;
-
-	return devm_drm_bridge_add(qmp->dev, &qmp->bridge);
-}
-#else
-static int qmp_combo_dp_register_bridge(struct qmp_combo *qmp)
-{
-	return 0;
-}
-#endif
-
 static int qmp_combo_parse_dt_lecacy_dp(struct qmp_combo *qmp, struct device_node *np)
 {
 	struct device *dev = qmp->dev;
@@ -3440,7 +3400,7 @@ static int qmp_combo_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ret = qmp_combo_dp_register_bridge(qmp);
+	ret = drm_aux_bridge_register(dev);
 	if (ret)
 		return ret;
 
-- 
2.39.2




More information about the linux-phy mailing list