[PATCH 1/6] dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Tue Oct 3 23:57:52 PDT 2023


On 03/10/2023 14:08, Nitheesh Sekar wrote:
> Document the Qualcomm UNIPHY PCIe 28LP present in IPQ5018.
> 
> Signed-off-by: Nitheesh Sekar <quic_nsekar at quicinc.com>

Thank you for your patch. There is something to discuss/improve.


> ---
>  .../bindings/phy/qcom,uniphy-pcie-28lp.yaml   | 77 +++++++++++++++++++
>  1 file changed, 77 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml b/Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml
> new file mode 100644
> index 000000000000..6b2574f9532e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml

Filename should match compatibles and they do not use 28lp.

> @@ -0,0 +1,77 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/qcom,uniphy-pcie-28lp.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm UNIPHY PCIe 28LP PHY driver

Driver as Linux driver? Drop. Describe the hardware instead.

> +
> +maintainers:
> +  - Nitheesh Sekar <quic_nsekar at quicinc.com>
> +  - Sricharan Ramabadhran <quic_srichara at quicinc.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,ipq5018-uniphy-pcie-gen2x1
> +      - qcom,ipq5018-uniphy-pcie-gen2x2
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: pipe_clk

Drop _clk... or even drop entire clock-names. Not needed for one entry.

> +
> +  resets:
> +    maxItems: 2
> +
> +  reset-names:
> +    items:
> +      - const: phy
> +      - const: phy_phy

These are absolutely terrible names. If you have third one, it would be
"phy_phy_phy"? Drop or provide something useful.

> +
> +  "#phy-cells":
> +    const: 0
> +
> +  "#clock-cells":
> +    const: 0
> +
> +  clock-output-names:
> +    maxItems: 1

Best regards,
Krzysztof




More information about the linux-phy mailing list