[PATCH 6/8] arm64: dts: qcom: ipq5332: Add Super-Speed UNIPHY in USB node

[Praveenkumar I]

On 9/30/2023 10:57 PM, Dmitry Baryshkov wrote:
> On 29/09/2023 11:42, Praveenkumar I wrote:
>> Add UNIPHY node in USB to support Super-speed. As the SS PHY has
>> pipe clock, removed "qcom,select-utmi-as-pipe-clk" flag.
>>
>> Signed-off-by: Praveenkumar I <quic_ipkumar at quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/ipq5332.dtsi | 6 ++----
>>   1 file changed, 2 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi 
>> b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> index 1813b9fa4bb5..8fe4e45bfc18 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> @@ -349,8 +349,6 @@ usb: usb at 8af8800 {
>>                 resets = <&gcc GCC_USB_BCR>;
>>   -            qcom,select-utmi-as-pipe-clk;
>> -
>>               #address-cells = <1>;
>>               #size-cells = <1>;
>>               ranges;
>> @@ -363,8 +361,8 @@ usb_dwc: usb at 8a00000 {
>>                   clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
>>                   clock-names = "ref";
>>                   interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
>> -                phy-names = "usb2-phy";
>> -                phys = <&usbphy0>;
>> +                phy-names = "usb2-phy", "usb3-phy";
>> +                phys = <&usbphy0>, <&usbphy1>;
>
> Ah, I see now. Maybe usbphy_ss_0 or something like that would be a 
> better label for this PHY. I'd expect usbphy1 to be used for other 
> host than usbphy0.
Sure, will change it.
>
>>                   tx-fifo-resize;
>>                   snps,is-utmi-l1-suspend;
>>                   snps,hird-threshold = /bits/ 8 <0x0>;
>
--
Thanks,
Praveenkumar