[PATCH 7/7] phy: qcom-qmp: qserdes-txrx: Add v7 register offsets
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Wed Nov 22 02:20:37 PST 2023
On Wed, 22 Nov 2023 at 12:04, Abel Vesa <abel.vesa at linaro.org> wrote:
>
> The X1E80100 platform bumps the HW version of QMP phy to v7 for USB and PCIE.
> Add the new qserdes TX RX offsets in a dedicated header file.
>
> Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
> ---
> .../phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v7.h | 78 ++++++++++++++++++++++
> drivers/phy/qualcomm/phy-qcom-qmp.h | 1 +
> 2 files changed, 79 insertions(+)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v7.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v7.h
> new file mode 100644
> index 000000000000..14023f47a95c
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v7.h
> @@ -0,0 +1,78 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2023, Linaro Limited
> + */
> +
> +#ifndef QCOM_PHY_QMP_QSERDES_TXRX_USB_V7_H_
> +#define QCOM_PHY_QMP_QSERDES_TXRX_USB_V7_H_
s/_USB//
> +
> +#define QSERDES_V7_TX_CLKBUF_ENABLE 0x08
> +#define QSERDES_V7_TX_RESET_TSYNC_EN 0x1c
> +#define QSERDES_V7_TX_PRE_STALL_LDO_BOOST_EN 0x20
> +#define QSERDES_V7_TX_TX_BAND 0x24
> +#define QSERDES_V7_TX_INTERFACE_SELECT 0x2c
> +#define QSERDES_V7_TX_RES_CODE_LANE_TX 0x34
> +#define QSERDES_V7_TX_RES_CODE_LANE_RX 0x38
> +#define QSERDES_V7_TX_RES_CODE_LANE_OFFSET_TX 0x3c
> +#define QSERDES_V7_TX_RES_CODE_LANE_OFFSET_RX 0x40
> +#define QSERDES_V7_TX_PARRATE_REC_DETECT_IDLE_EN 0x60
> +#define QSERDES_V7_TX_BIST_PATTERN7 0x7c
> +#define QSERDES_V7_TX_LANE_MODE_1 0x84
> +#define QSERDES_V7_TX_LANE_MODE_2 0x88
> +#define QSERDES_V7_TX_LANE_MODE_3 0x8c
> +#define QSERDES_V7_TX_LANE_MODE_4 0x90
> +#define QSERDES_V7_TX_LANE_MODE_5 0x94
> +#define QSERDES_V7_TX_RCV_DETECT_LVL_2 0xa4
> +#define QSERDES_V7_TX_TRAN_DRVR_EMP_EN 0xc0
> +#define QSERDES_V7_TX_TX_INTERFACE_MODE 0xc4
> +#define QSERDES_V7_TX_VMODE_CTRL1 0xc8
> +#define QSERDES_V7_TX_PI_QEC_CTRL 0xe4
> +
> +#define QSERDES_V7_RX_UCDR_FO_GAIN 0x08
> +#define QSERDES_V7_RX_UCDR_SO_GAIN 0x14
> +#define QSERDES_V7_RX_UCDR_FASTLOCK_FO_GAIN 0x30
> +#define QSERDES_V7_RX_UCDR_SO_SATURATION_AND_ENABLE 0x34
> +#define QSERDES_V7_RX_UCDR_FASTLOCK_COUNT_LOW 0x3c
> +#define QSERDES_V7_RX_UCDR_FASTLOCK_COUNT_HIGH 0x40
> +#define QSERDES_V7_RX_UCDR_PI_CONTROLS 0x44
> +#define QSERDES_V7_RX_UCDR_SB2_THRESH1 0x4c
> +#define QSERDES_V7_RX_UCDR_SB2_THRESH2 0x50
> +#define QSERDES_V7_RX_UCDR_SB2_GAIN1 0x54
> +#define QSERDES_V7_RX_UCDR_SB2_GAIN2 0x58
> +#define QSERDES_V7_RX_AUX_DATA_TCOARSE_TFINE 0x60
> +#define QSERDES_V7_RX_TX_ADAPT_POST_THRESH 0xcc
> +#define QSERDES_V7_RX_VGA_CAL_CNTRL1 0xd4
> +#define QSERDES_V7_RX_VGA_CAL_CNTRL2 0xd8
> +#define QSERDES_V7_RX_GM_CAL 0xdc
> +#define QSERDES_V7_RX_RX_EQU_ADAPTOR_CNTRL2 0xec
> +#define QSERDES_V7_RX_RX_EQU_ADAPTOR_CNTRL3 0xf0
> +#define QSERDES_V7_RX_RX_EQU_ADAPTOR_CNTRL4 0xf4
> +#define QSERDES_V7_RX_RX_IDAC_TSETTLE_LOW 0xf8
> +#define QSERDES_V7_RX_RX_IDAC_TSETTLE_HIGH 0xfc
> +#define QSERDES_V7_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x110
> +#define QSERDES_V7_RX_SIDGET_ENABLES 0x118
> +#define QSERDES_V7_RX_SIGDET_CNTRL 0x11c
> +#define QSERDES_V7_RX_SIGDET_DEGLITCH_CNTRL 0x124
> +#define QSERDES_V7_RX_RX_MODE_00_LOW 0x15c
> +#define QSERDES_V7_RX_RX_MODE_00_HIGH 0x160
> +#define QSERDES_V7_RX_RX_MODE_00_HIGH2 0x164
> +#define QSERDES_V7_RX_RX_MODE_00_HIGH3 0x168
> +#define QSERDES_V7_RX_RX_MODE_00_HIGH4 0x16c
> +#define QSERDES_V7_RX_RX_MODE_01_LOW 0x170
> +#define QSERDES_V7_RX_RX_MODE_01_HIGH 0x174
> +#define QSERDES_V7_RX_RX_MODE_01_HIGH2 0x178
> +#define QSERDES_V7_RX_RX_MODE_01_HIGH3 0x17c
> +#define QSERDES_V7_RX_RX_MODE_01_HIGH4 0x180
> +#define QSERDES_V7_RX_RX_MODE_10_LOW 0x184
> +#define QSERDES_V7_RX_RX_MODE_10_HIGH 0x188
> +#define QSERDES_V7_RX_RX_MODE_10_HIGH2 0x18c
> +#define QSERDES_V7_RX_RX_MODE_10_HIGH3 0x190
> +#define QSERDES_V7_RX_RX_MODE_10_HIGH4 0x194
> +#define QSERDES_V7_RX_DFE_EN_TIMER 0x1a0
> +#define QSERDES_V7_RX_DFE_CTLE_POST_CAL_OFFSET 0x1a4
> +#define QSERDES_V7_RX_DCC_CTRL1 0x1a8
> +#define QSERDES_V7_RX_VTH_CODE 0x1b0
> +#define QSERDES_V7_RX_SIGDET_CAL_CTRL1 0x1e4
> +#define QSERDES_V7_RX_SIGDET_CAL_TRIM 0x1f8
> +
> +#endif
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
> index 63b3cbfcb50f..6923496cbfee 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.h
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
> @@ -28,6 +28,7 @@
> #include "phy-qcom-qmp-qserdes-ln-shrd-v6.h"
>
> #include "phy-qcom-qmp-qserdes-com-v7.h"
> +#include "phy-qcom-qmp-qserdes-txrx-v7.h"
>
> #include "phy-qcom-qmp-qserdes-pll.h"
>
>
> --
> 2.34.1
>
>
--
With best wishes
Dmitry
More information about the linux-phy
mailing list