[PATCH 4/7] phy: qcom-qmp: pcs-usb: Add v7 register offsets

[Dmitry Baryshkov]

On Wed, 22 Nov 2023 at 12:04, Abel Vesa <abel.vesa at linaro.org> wrote:
>
> The X1E80100 platform bumps the HW version of QMP phy to v7 for USB.
> Add the new PCS USB specific offsets in a dedicated header file.
>
> Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v7.h | 31 ++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v7.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v7.h
> new file mode 100644
> index 000000000000..dbb75964cef7
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v7.h
> @@ -0,0 +1,31 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2023, Linaro Limited
> + */
> +
> +#ifndef QCOM_PHY_QMP_PCS_USB_V7_H_
> +#define QCOM_PHY_QMP_PCS_USB_V7_H_
> +
> +/* Only for QMP V6 PHY - USB3 have different offsets than V5 */

V7

> +#define QPHY_USB_V7_PCS_LOCK_DETECT_CONFIG1            0xc4
> +#define QPHY_USB_V7_PCS_LOCK_DETECT_CONFIG2            0xc8
> +#define QPHY_USB_V7_PCS_LOCK_DETECT_CONFIG3            0xcc
> +#define QPHY_USB_V7_PCS_LOCK_DETECT_CONFIG6            0xd8
> +#define QPHY_USB_V7_PCS_REFGEN_REQ_CONFIG1             0xdc
> +#define QPHY_USB_V7_PCS_USB3_POWER_STATE_CONFIG1       0x90
> +#define QPHY_USB_V7_PCS_RX_SIGDET_LVL                  0x188
> +#define QPHY_USB_V7_PCS_RCVR_DTCT_DLY_P1U2_L           0x190
> +#define QPHY_USB_V7_PCS_RCVR_DTCT_DLY_P1U2_H           0x194
> +#define QPHY_USB_V7_PCS_CDR_RESET_TIME                 0x1b0
> +#define QPHY_USB_V7_PCS_ALIGN_DETECT_CONFIG1           0x1c0
> +#define QPHY_USB_V7_PCS_ALIGN_DETECT_CONFIG2           0x1c4
> +#define QPHY_USB_V7_PCS_PCS_TX_RX_CONFIG               0x1d0
> +#define QPHY_USB_V7_PCS_EQ_CONFIG1                     0x1dc
> +#define QPHY_USB_V7_PCS_EQ_CONFIG5                     0x1ec

Some (most) of these registers do not belong here, they are the same
as the generic PCS register names. Please drop them.

> +
> +#define QPHY_USB_V7_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL   0x18
> +#define QPHY_USB_V7_PCS_USB3_RXEQTRAINING_DFE_TIME_S2  0x3c
> +#define QPHY_USB_V7_PCS_USB3_RCVR_DTCT_DLY_U3_L                0x40
> +#define QPHY_USB_V7_PCS_USB3_RCVR_DTCT_DLY_U3_H                0x44

Drop the _USB_ part, please, there is already PCS_USB3 prefix.

> +
> +#endif
>
> --
> 2.34.1
>
>


-- 
With best wishes
Dmitry