[PATCH 6/7] phy: qcom-qmp: qserdes-txrx: Add V6 N4 register offsets

Abel Vesa abel.vesa at linaro.org
Wed Nov 22 02:03:58 PST 2023


There is a variant of V6 offsets that are different, the QMP PHY N4,
and it is found on the X1E80100 platform.

Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
---
 .../phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_n4.h | 51 ++++++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp.h                |  1 +
 2 files changed, 52 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_n4.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_n4.h
new file mode 100644
index 000000000000..a814ad11af07
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_n4.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_V6_N4_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_V6_N4_H_
+
+#define QSERDES_V6_N4_TX_RES_CODE_LANE_OFFSET_TX	0x30
+#define QSERDES_V6_N4_TX_RES_CODE_LANE_OFFSET_RX	0x34
+#define QSERDES_V6_N4_TX_LANE_MODE_1			0x78
+#define QSERDES_V6_N4_TX_LANE_MODE_2			0x7c
+#define QSERDES_V6_N4_TX_LANE_MODE_3			0x80
+
+#define QSERDES_V6_N4_RX_UCDR_FO_GAIN_RATE2		0x8
+#define QSERDES_V6_N4_RX_UCDR_SO_GAIN_RATE2		0x18
+#define QSERDES_V6_N4_RX_UCDR_PI_CONTROLS		0x20
+#define QSERDES_V6_N4_RX_IVCM_CAL_CODE_OVERRIDE		0x94
+#define QSERDES_V6_N4_RX_RX_IVCM_CAL_CTRL2		0x9c
+#define QSERDES_V6_N4_RX_RX_IVCM_POSTCAL_OFFSET		0xa0
+#define QSERDES_V6_N4_RX_DFE_3				0xb4
+#define QSERDES_V6_N4_RX_VGA_CAL_CNTRL1			0xe0
+#define QSERDES_V6_N4_RX_VGA_CAL_MAN_VAL		0xe8
+#define QSERDES_V6_N4_RX_GM_CAL				0x10c
+#define QSERDES_V6_N4_RX_SIGDET_ENABLES			0x148
+#define QSERDES_V6_N4_RX_SIGDET_CNTRL			0x14c
+#define QSERDES_V6_N4_RX_SIGDET_DEGLITCH_CNTRL		0x154
+#define QSERDES_V6_N4_RX_DFE_CTLE_POST_CAL_OFFSET	0x194
+#define QSERDES_V6_N4_RX_Q_PI_INTRINSIC_BIAS_RATE32	0x1dc
+#define QSERDES_V6_N4_RX_UCDR_PI_CTRL1			0x23c
+#define QSERDES_V6_N4_RX_UCDR_PI_CTRL2			0x240
+#define QSERDES_V6_N4_RX_UCDR_SB2_GAIN2_RATE2		0x27c
+#define QSERDES_V6_N4_RX_DFE_DAC_ENABLE1		0x298
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B0		0x2b8
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B1		0x2bc
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B2		0x2c0
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B3		0x2c4
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B4		0x2c8
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B5		0x2cc
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B6		0x2d0
+#define QSERDES_V6_N4_RX_MODE_RATE2_B0			0x2d4
+#define QSERDES_V6_N4_RX_MODE_RATE2_B1			0x2d8
+#define QSERDES_V6_N4_RX_MODE_RATE2_B2			0x2dc
+#define QSERDES_V6_N4_RX_MODE_RATE2_B3			0x2e0
+#define QSERDES_V6_N4_RX_MODE_RATE2_B4			0x2e4
+#define QSERDES_V6_N4_RX_MODE_RATE2_B5			0x2e8
+#define QSERDES_V6_N4_RX_MODE_RATE2_B6			0x2ec
+#define QSERDES_V6_N4_RX_RX_SUMMER_CAL_SPD_MODE		0x30c
+#define QSERDES_V6_N4_RX_RX_BKUP_CTRL1			0x310
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 3a0512c3e07a..63b3cbfcb50f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -24,6 +24,7 @@
 #include "phy-qcom-qmp-qserdes-com-v6.h"
 #include "phy-qcom-qmp-qserdes-txrx-v6.h"
 #include "phy-qcom-qmp-qserdes-txrx-v6_20.h"
+#include "phy-qcom-qmp-qserdes-txrx-v6_n4.h"
 #include "phy-qcom-qmp-qserdes-ln-shrd-v6.h"
 
 #include "phy-qcom-qmp-qserdes-com-v7.h"

-- 
2.34.1




More information about the linux-phy mailing list