[PATCH v1 1/2] phy: qcom-qmp-pcie: add x4 lane EP support for sa8775p

[Dmitry Baryshkov]

On Tue, 7 Nov 2023 at 15:05, Mrinmay Sarkar <quic_msarkar at quicinc.com> wrote:
>
> Add support for x4 lane end point mode PHY found on sa8755p platform.
> Reusing existing serdes and pcs_misc table for EP and moved
> BIAS_EN_CLKBUFLR_EN register from RC serdes table to common serdes
> table as this register is part of both RC and EP.
>
> Signed-off-by: Mrinmay Sarkar <quic_msarkar at quicinc.com>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>

> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> index b64598a..7114b4e 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> @@ -2099,6 +2099,7 @@ static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_pcs_alt_tbl[] = {
>  };
>
>  static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_serdes_alt_tbl[] = {
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
>         QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
>         QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
>         QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
> @@ -2125,7 +2126,6 @@ static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_rc_serdes_alt_tbl[]
>         QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
>         QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x97),
>         QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x0c),
> -       QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
>         QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
>         QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
>         QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
> @@ -3114,6 +3114,13 @@ static const struct qmp_phy_cfg sa8775p_qmp_gen4x4_pciephy_cfg = {
>                 .pcs_misc_num   = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_rc_pcs_misc_tbl),
>         },
>
> +       .tbls_ep = &(const struct qmp_phy_cfg_tbls) {
> +               .serdes         = sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl,
> +               .serdes_num     = ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl),
> +               .pcs_misc       = sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl,
> +               .pcs_misc_num   = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl),
> +       },
> +
>         .reset_list             = sdm845_pciephy_reset_l,
>         .num_resets             = ARRAY_SIZE(sdm845_pciephy_reset_l),
>         .vreg_list              = qmp_phy_vreg_l,
> --
> 2.7.4
>


-- 
With best wishes
Dmitry