[PATCH v2 1/3] dt-bindings: phy: qcom,qmp: Add PCIe qcom,refclk-always-on property

[Dmitry Baryshkov]

On Tue, 7 Nov 2023 at 14:26, Krishna chaitanya chundru
<quic_krichai at quicinc.com> wrote:
>
> Document qcom,refclk-always-on property which is needed in some platforms
> to supply refclk even in PCIe low power states.
>
> Signed-off-by: Krishna chaitanya chundru <quic_krichai at quicinc.com>
> ---
>  .../devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml        | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> index 2c3d6553a7ba..263291447a5b 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> @@ -93,6 +93,13 @@ properties:
>    "#phy-cells":
>      const: 0
>
> +  qcom,refclk-always-on:
> +    type: boolean
> +    description: If there is some issues in platform with clkreq signal

nit: there are some

However this still doesn't describe what kind of issues with clkreq
you observe. I mean, clkreq is just a GPIO pin.

> +      propagation to the host and due to that host will not send refclk, which
> +      results in linkdown in L1.2 or L1.1 exit initiated by EP. This property
> +      if set keeps refclk always on even in Low power states (optional).
> +
>  required:
>    - compatible
>    - reg
>
> --
> 2.42.0
>
>


-- 
With best wishes
Dmitry