[PATCH 0/2] PHY-GMII-SEL: Add support for J784S4 SoC

[Siddharth Vadapalli]

Hello Vinod,

On 31-03-2023 19:03, Vinod Koul wrote:
> On 31-03-23, 11:55, Siddharth Vadapalli wrote:
>> Hello,
>>
>> This series TI's J784S4 SoC. A new compatible is added for the J784S4 SoC,
>> with QSGMII mode enabled. Also, the CPSW9G instance of J784S4 SoC supports
>> USXGMII mode. Thus, add support to configure USXGMII mode.
> 
> Sorry this fails to apply for me, pls rebase and send

This series has to be applied after the following series:
https://lore.kernel.org/r/20230309063514.398705-1-s-vadapalli@ti.com/
as mentioned below.

Regards,
Siddharth.
> 
>>
>> Note:
>> This series is based on top of the following series:
>> https://lore.kernel.org/r/20230309063514.398705-1-s-vadapalli@ti.com/
>>
>> The patch corresponding to the device-tree bindings for the compatible
>> "ti,j784s4-cpsw9g-phy-gmii-sel" is posted at:
>> https://lore.kernel.org/r/20230315092408.1722114-1-s-vadapalli@ti.com
>> Since the above patch has received an Acked-by from Krzysztof Kozlowski,
>> I am posting this series using the compatible.
>>
>> Regards,
>> Siddharth.
>>
>> Siddharth Vadapalli (2):
>>   phy: ti: gmii-sel: Add support for CPSW9G GMII SEL in J784S4
>>   phy: ti: gmii-sel: Enable USXGMII mode for J784S4
>>
>>  drivers/phy/ti/phy-gmii-sel.c | 22 ++++++++++++++++++++++
>>  1 file changed, 22 insertions(+)
>>
>> -- 
>> 2.25.1
>