[PATCH v5 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Mar 30 02:44:40 PDT 2023
On Thu, 30 Mar 2023 at 11:42, Varadarajan Narayanan
<quic_varada at quicinc.com> wrote:
>
> Add USB phy and controller related nodes
>
> Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
> ---
> Changes in v5:
> - Fix additional comments
> - Edit nodes to match with qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> - 'make dtbs_check' giving the following messages since
> ipq9574 doesn't have power domains. Hope this is ok
>
> /local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy at 7d000: 'power-domains' is a required property
> From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> /local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb at 8a00000: 'power-domains' is a required property
> From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
No, I think it is not.
>
>
> Changes in v4:
> - Use newer bindings without subnodes
> - Fix coding style issues
>
> Changes in v3:
> - Insert the nodes at proper location
>
> Changes in v2:
> - Fixed issues flagged by Krzysztof
> - Fix issues reported by make dtbs_check
> - Remove NOC related clocks (to be added with proper
> interconnect support)
>
> Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 120 ++++++++++++++++++++++++++++++++++
> 1 file changed, 120 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index 2bb4053..8fa9e1a 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -186,6 +186,33 @@
> method = "smc";
> };
>
> + reg_usb_3p3: s3300 {
> + compatible = "regulator-fixed";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-name = "usb-phy-vdd-dummy";
> + };
> +
> + reg_usb_1p8: s1800 {
> + compatible = "regulator-fixed";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-name = "usb-phy-pll-dummy";
> + };
> +
> + reg_usb_0p925: s0925 {
> + compatible = "regulator-fixed";
> + regulator-min-microvolt = <925000>;
> + regulator-max-microvolt = <925000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-name = "usb-phy-dummy";
> + };
> +
> reserved-memory {
> #address-cells = <2>;
> #size-cells = <2>;
> @@ -215,6 +242,52 @@
> #size-cells = <1>;
> ranges = <0 0 0 0xffffffff>;
>
> + qusb_phy_0: phy at 7b000 {
> + compatible = "qcom,ipq9574-qusb2-phy";
> + reg = <0x0007b000 0x180>;
> + #phy-cells = <0>;
> +
> + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> + <&xo_board_clk>;
> + clock-names = "cfg_ahb",
> + "ref";
> +
> + vdd-supply = <®_usb_0p925>;
> + vdda-pll-supply = <®_usb_1p8>;
> + vdda-phy-dpdm-supply = <®_usb_3p3>;
> +
> + resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
> + status = "disabled";
> + };
> +
> + ssphy_0: phy at 7d000 {
Nit: usually the label usb_0_qmpphy
> + compatible = "qcom,ipq9574-qmp-usb3-phy";
> + reg = <0x0007d000 0xa00>;
> + #phy-cells = <0>;
> +
> + clocks = <&gcc GCC_USB0_AUX_CLK>,
> + <&xo_board_clk>,
> + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> + <&gcc GCC_USB0_PIPE_CLK>;
> + clock-names = "aux",
> + "ref",
> + "com_aux",
> + "pipe";
> +
> + resets = <&gcc GCC_USB0_PHY_BCR>,
> + <&gcc GCC_USB3PHY_0_PHY_BCR>;
> + reset-names = "phy",
> + "phy_phy";
> +
> + vdda-pll-supply = <®_usb_1p8>;
> + vdda-phy-supply = <®_usb_0p925>;
> +
> + status = "disabled";
> +
> + #clock-cells = <0>;
> + clock-output-names = "usb0_pipe_clk";
> + };
> +
> pcie0_phy: phy at 84000 {
> compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
> reg = <0x00084000 0x1bc>; /* Serdes PLL */
> @@ -436,6 +509,53 @@
> status = "disabled";
> };
>
> + usb3: usb at 8a00000 {
> + compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
> + reg = <0x08af8800 0x400>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + clocks = <&gcc GCC_SNOC_USB_CLK>,
> + <&gcc GCC_ANOC_USB_AXI_CLK>,
> + <&gcc GCC_USB0_MASTER_CLK>,
> + <&gcc GCC_USB0_SLEEP_CLK>,
> + <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> +
> + clock-names = "sys_noc_axi",
> + "anoc_axi",
> + "master",
> + "sleep",
> + "mock_utmi";
> +
> + assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
> + <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> + assigned-clock-rates = <200000000>,
> + <24000000>;
> +
> + interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "pwr_event";
> +
> + resets = <&gcc GCC_USB_BCR>;
> + status = "disabled";
> +
> + dwc_0: usb at 8a00000 {
> + compatible = "snps,dwc3";
> + reg = <0x8a00000 0xcd00>;
> + clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> + clock-names = "ref";
> + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&qusb_phy_0>, <&ssphy_0>;
> + phy-names = "usb2-phy", "usb3-phy";
> + tx-fifo-resize;
> + snps,is-utmi-l1-suspend;
> + snps,hird-threshold = /bits/ 8 <0x0>;
> + snps,dis_u2_susphy_quirk;
> + snps,dis_u3_susphy_quirk;
> + dr_mode = "host";
> + };
> + };
> +
> intc: interrupt-controller at b000000 {
> compatible = "qcom,msm-qgic2";
> reg = <0x0b000000 0x1000>, /* GICD */
> --
> 2.7.4
>
--
With best wishes
Dmitry
More information about the linux-phy
mailing list