[PATCH 3/5] arm64: dts: qcom: sm8150: turn first USB PHY into USB+DP PHY
Konrad Dybcio
konrad.dybcio at linaro.org
Mon Mar 27 03:52:59 PDT 2023
On 27.03.2023 12:14, Dmitry Baryshkov wrote:
> On 27/03/2023 11:05, Neil Armstrong wrote:
>> On 27/03/2023 09:59, Neil Armstrong wrote:
>>> On 24/03/2023 22:55, Dmitry Baryshkov wrote:
>>>> The first USB PHY on the sm8150 platform is really the USB+DP combo
>>>> PHY. Add the DP part of the PHY.
>>>>
>>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>>>> ---
>>>> arch/arm64/boot/dts/qcom/sm8150.dtsi | 17 +++++++++++++----
>>>> 1 file changed, 13 insertions(+), 4 deletions(-)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
>>>> index 9491be4a6bf0..a618218f7b68 100644
>>>> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
>>>> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
>>>> @@ -3392,20 +3392,19 @@ usb_2_hsphy: phy at 88e3000 {
>>>> };
>>>> usb_1_qmpphy: phy at 88e9000 {
>>>> - compatible = "qcom,sm8150-qmp-usb3-phy";
>>>> + compatible = "qcom,sm8150-qmp-usb3-dp-phy";
>>>> reg = <0 0x088e9000 0 0x18c>,
>>>> - <0 0x088e8000 0 0x10>;
>>>> + <0 0x088e8000 0 0x38>,
>>>> + <0 0x088ea000 0 0x40>;
>>>> status = "disabled";
>>>> #address-cells = <2>;
>>>> #size-cells = <2>;
>>>> ranges;
>>>> -
>>>> clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
>>>> <&rpmhcc RPMH_CXO_CLK>,
>>>> <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
>>>> <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
>>>> clock-names = "aux", "ref_clk_src", "ref", "com_aux";
>>>> -
>>>> resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
>>>> <&gcc GCC_USB3_PHY_PRIM_BCR>;
>>>> reset-names = "phy", "common";
>>>> @@ -3423,6 +3422,16 @@ usb_1_ssphy: phy at 88e9200 {
>>>> clock-names = "pipe0";
>>>> clock-output-names = "usb3_phy_pipe_clk_src";
>>>> };
>>>> +
>>>> + usb_1_dpphy: phy at 88ea200 {
>>>> + reg = <0 0x088ea200 0 0x200>,
>>>> + <0 0x088ea400 0 0x200>,
>>>> + <0 0x088eaa00 0 0x200>,
>>>> + <0 0x088ea600 0 0x200>,
>>>> + <0 0x088ea800 0 0x200>;
>>>> + #clock-cells = <1>;
>>>> + #phy-cells = <0>;
>>>> + };
>>>
>>> Is there a reason why the new flat bindings from qcom,sc8280xp-qmp-usb43dp-phy.yaml are not used instead ?
>>>
>>
>> Oh ok I see "phy: qcom-qmp-combo: convert to newer style of bindings" is the followup of this serie,
>> please specify it because it wasn't obvious...
>
> I thought that a note in the cover letter was good enough, but yeah, maybe it should be more explicit. Do you think it warrants v2? I can send one.
IMO it's unnecessary so long as both get in.
Konrad
>
More information about the linux-phy
mailing list